CHIJIU/Mei Yingpu D2010W Overhead Stirrer High viscosity liquid Stirrer

Description

Chijiu/Meiyingpu D2010W electric mixer is a high-viscosity liquid stirrer with a stirring power of 100W and no sparks, and the D2010W electric mixer is suitable for high-viscosity liquid stirring, and the clamping size of the chuck is Φ1.5~10 mm.

The electric mixer D2010W is driven by DC three-phase brushless motor, no sparks, high efficiency, large torque, and very slight temperature rise of the motor, which can adapt to high-viscosity liquid stirring, and the stirring speed is digitally displayed.

Pictures

How to use:

1. Installation: Load the column into the base and tighten it, tighten the set screw, install the cross joint on the column, and insert the cross bar of the host into the cross joint for fixation;

2. Install the stirring rod before use, and the stirring rod can be directly loaded into the chuck for clamping, but to ensure the straightness of the stirring rod, a soft connection shaft can be used to connect the stirring rod;

3. Before turning on the machine, put the power switch in the off position, adjust the knob to the minimum counterclockwise, then plug in the power supply, turn on the power switch, the built-in indicator light of the switch is on, the speed display is "0000", and slowly adjust the knob clockwise to the required speed.

Precautions

1. When the agitator is used, it should be accelerated slowly from slow to fast, if the straightness of the stirring rod is poor, the speed can not be fast or the soft connecting shaft should be fixed with a support sleeve in the middle.

2. When the electric mixer D2010W is working, please do not get too close to avoid the danger of clothes and hair being involved;

3. Prevent liquid from splashing out when stirring.

host x1, base x1, cross section x1, column x1, drill wrench x1, instruction manual x1, certificate x1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.