BOTECH botech BT-880 sand blasting Roughness Gauge

Overview

BT-880 shot blasting roughness Tester conforms to ASTM D4417 method CNACERP0287-95 test method, can directly measure the height of the peak-valley floor of the surface, suitable for: shot blasting industry, printing industry, spraying anti-corrosion industry and other industries that require surface roughness, calculate the corresponding parameters according to the selected measurement conditions, and clearly display all the measurement parameters on the LCD display. When measuring the surface roughness of the workpiece, the instrument sensor is placed on the surface to be measured on the workpiece, and the roughness of the measured surface is felt by the sharp stylus built in the instrument, and the roughness of the surface to be measured of the workpiece causes the stylus to produce displacement at this moment, and this displacement makes the inductance of the sensor inductance coil change, so that the surface roughness of the measured is generated at the output end of the phase-sensitive rectifier Proportional analog signal, the signal is amplified and level-converted into the data acquisition system, the DSP chip will collect the data for digital filtering and parameter calculation, and the measurement results are displayed on the liquid crystal display.

Features

It is compatible with ISO, DIN, ANSI, JIS national standards, and is used for surface roughness requirements in shot blasting industry, printing industry, spraying and anti-corrosion industry

High-precision inductive sensors

All-in-one design, small size, light weight, use

It has an automatic shutdown function

The instrument has two shutdown methods, i.e., manual shutdown and automatic shutdown, at any time, as long as you press the multi-function button, when the monitor is OFF, you can manually turn off the power of the whole machine, on the other hand, if you do not press any button within 1 minute, or do not take any measurements

It has the function of converting the metric to the imperial system

It has the function of calculating the average value

Applications

It is used in the shot blasting industry, printing industry, spraying anti-corrosion industry and other industries that require surface roughness

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.