EYESKY ES20B-CH2O Portable Formaldehyde Detector Range 0~10ppm
EYESKY ES20B-CH2O portable Formaldehyde Detector adopts 2.5 inch dot matrix LCD screen, all metal shell, ES20B-CH2O measurement gas concentration is 0~10ppm, adopts pump suction Sampling method, ES20B-CH2O portable Formaldehyde Detector is widely used in, metallurgy, petroleum and petrochemical, municipal, chemical, biological, and other fields.
EYESKY-
CA-680B Dust Particle Counter Cleanliness Detection with Audit + Storage
$ 1128.00 -
SMART SENSOR smart sensor AS5750 halogen Gas Detector
$ 105.00 -
GUOYUGRA GY/VGD-200-CO2-G Carbon dioxide Gas Detector Infrared/0-2000ppm
$ 394.00 -
SUJIE SJ-100L Laser Dust Particle Counter 100L/min
$ 9841.00 -
KORNO GT-903-PH3-Y phosphating hydrogen Detector, range 0-5PPM
$ 525.00
Introduction
Visionless ES20B-CH2O portable formaldehyde Detector is a new high-end Detector created by Visionless Technology on the basis of ES20A.adoptAll-metal housing, performance and various aspects of the index relative toES20A has been greatly improved, using new original imported sensors and more32-bit low-power processor; The circuit adopts 4 layers of wiring, which is stronger against weak signals and anti-interference; Independent high-precision imported AD chip(Some manufacturers use it in order to save costs.)2-layer circuit board and AD function built into the CPU) with unsightly possession of signalsProcessing algorithm, higher accuracy and more stable measurement results;2.5-inch dot matrix display interface, intuitive and generous reading; Very good workmanshipmeter, broughtRock solidquality. It can be applied to various hazardous industrial sites; The products are widely used in metallurgy, stoneOil & Petrochemical, Municipal, Chemical,Biology, home environmental protection, school laboratories, automobile exhaustand other fields.
Features
◆ Rose Tuhao gold all-metal shell, ergonomic design, full of feel, highlighting high-end quality;
◆ Adopt independent precision AD chip, 4-layer circuit board design, stronger ability to weak signal and anti-interference;
◆ 2.5-inch dot matrix display interface, large font interface reading beautiful, menu design is scientific and reasonable;
◆ Imported high-performance sensor, high measurement accuracy, good repeatability and long service life;
◆ Built-in high-performance suction pump, stable flow rate, can be switched on and off;
◆ Temperature and humidity display, and powerful data storage function (optional);
◆ mg/m3, PPM, VOL, LEL, PPB can be selected;
◆ Embedded 32-bit ultra-low power processor, with independent signal processing algorithm, fast response speed and stability;
◆ Scientific and reasonable sound and light alarm design, symmetrical curve, timely alarm prompt when exceeding the standard is detected, to protect personal safety;
◆ Very good industrial design, the fuselage is made of high-strength aluminum profile of military quality, wear-resistant and corrosion-resistant, suitable for complex and harsh industrial environments.








EYESKY ES20B-CH2O(0~10ppm) Formaldehyde Detector Specifications
| LIST | VALUE |
|---|---|
| Detect gas | Formaldehyde CH2O |
| Sensors principle | electrochemistry |
| Sampling method | Pump suction |
| CH2O-range | 0~10ppm |
| CH2O-resolution | 0.01ppm |
| Precision | ±3%FS |
| Repeatability | <3% |
| Response time | T90 ≤30s |
| Alarm mode | Sound and light alarm, two-color LED alarm light, sound ≥ 75dB@25cm |
| Operation mode | Key operation (key life up to 200,000 times) |
| main material | Full metal shell, strong wear and corrosion resistance, good feel |
| Operating temperature | -30~70 ℃ (conventional gas), -20~50 ℃ (toxic gas) |
| Environmental humidity | 10~90% RH non-condensing |
| Operating Pressure | 86~106kPa |
| Power Supply | Built-in high-performance imported core lithium battery, nominal Voltage: 3.7VDC, 2500mAh |
| Charging time | ≤ 6 hours, fully charged for 12 hours |
| Operating Time | ≥ 12h (at room temperature) |
| Dimension | 135*65*35mm |
| Weight | About 0.46Kg |
| Explosion-proof sign | Exd ib ⅡC T4 Gb |
| Protection level | IP66 |
| execution standard | GB15322.1-2003,GB3836.1-2010,GB3836.2-2010,GB3836.4-2010 |
EYESKY ES20B-CH2O(0~10ppm) Formaldehyde Detector Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Influence of hot pressing process and environment parameters on TVOC and formaldehyde release from particle board
- Biaozhi GM8801 Formaldehyde Tester Instructions for Use
- Current Situation and Research Direction of VOC Detection Methods in Air
- How to choose and use a Gas Detector
- Gas Detector purchase required common sense
- How Gas Detectors and Sensors work
- What is the difference between the application of gas alarm diffusion type and pump suction type?
- How to perform Gas detection analysis in limited space operations?
- How to choose the right Gas detection device?
- Gas Detector daily use and verification process precautions


ES20B-CH2O(0~10ppm)





