Search
    Cart(0)
      总价
      前往结算
      您的购物车是空的 : )
      Home> Gas detector> DuoRui> DuoRui DR-600 (standard type) Point Gas Detector

      DUORUI DR-600 Point Gas Detector, Standard, Combustible 0-100% LEL

      DUORUI DR-600 point Gas Detector is used to detect the concentration of combustible gas, the range is 0-100% LEL, DR-600 point Gas Detector adopts diffusion Sampling method, the error of indication is +/- 5% FS.

      Brand
      SKU: NB017767
      China DuoRui
      VS
      DuoRuiLOGO

      DuoRui

      Information
      Genuinegoods
      • DuoRui DR-600 (standard type) Point Gas DetectorOverview

      • Specifications
      • Comments
      • FAQs
      DR-600 (standard type)
      Point Gas Detector

      Introduction

      DR-600 (Standard Type) is a point Gas Detector with diffusion sampling method and catalytic combustion detection principle, the range of this Gas Detector is 0-100%LEL, and the indication error is ±5%FS.

      DR-600 (Standard) Point Gas Detector1

      DR-600 (Standard) Point Gas Detector2

      DR-600 (Standard) Point Gas Detector3

      DR-600 (Standard) Point Gas Detector 4

      DR-600 (Standard) Point Gas Detector5

      DR-600 (Standard) Point Gas Detector6

      DR-600 (Standard) Point Gas Detector7

      Dorui DR-600 (Standard) Point Gas Detector 8

      DR-600 (Standard) Point Gas Detector 9

      DR-600 (Standard) Point Gas Detector 10

      DR-600 (Standard) Point Gas Detector 11

      DR-600 (Standard) Point Gas Detector 12

      DR-600 (Standard) Point Gas Detector 13

      DR-600 (Standard) Point Gas Detector 14

      DR-600 (Standard) Point Gas Detector 15

      DR-600 (Standard) Point Gas Detector 16

      DR-600 (Standard) Point Gas Detector 17

      DR-600 (Standard) Point Gas Detector 18


      VS

      DuoRui DR-600 (standard type) Point Gas DetectorSpecifications

      LIST VALUE
      Range 0~100%LEL
      Error of indication ±5%FS
      Sampling method diffusion
      Sensors principle Catalytic combustion
      Response time T90≤60s
      Shell material die casting aluminum
      operating temperature -40~70℃
      service life 2-3 years (depending on the environment)
      Cable Specifications RVVP3×1.0mm2
      Dimensions 180*140*75mm
      Resolution 0.1%LEL、1%LEL
      Response time T90≤60s
      Shell material die casting aluminum
      operating temperature -40~70℃
      Operating Time 24H online work
      Electrical interface M20 * 1.5 thread
      Signal transmission distance ≥ 1000 meters
      Output signal 4-20Mas or RS485
      Explosion-proof sign Ex d IIC T6Gb
      Protection level IP65
      Metrology authentication CMC
      Working Power 2.5w
      Power Supply 24VDC
      Display No display
      Alarm mode No alarm
      Installation method Fixing brackets, wall hangings, etc

      DuoRui DR-600 (standard type) Point Gas Detector Packing list

      machine X1, manual X1, certificate X1, warranty card X1

      [Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

      FAQ

      [Q]
      Can this DR-600 be used with a single purchase?
      [A]
      DR-600 standard combustible gas detector is installed in the field to detect gas concentration, because the standard model itself can not show the alarm, you need to connect the host or DCS system, through the host or DCS display and alarm, you only buy the detector now, can not display and alarm, no practical significance, if you do not want the host or do not connect the DCS system, then you need to provide 24V power to the probe on site, and the detector itself also needs to be with alarm and display function
      [Q]
      Meet the requirements of GB3836.1 point gas detector
      [A]
      DR-600 (standard) point gas detector, please refer to it.
      DuoRui
      DUORUI DR-600 Point Gas Detector, Standard, Combustible 0-100% LEL
      Service
      Focus on online sales of Lab Testing Instruments