PUSHEN Zahn 2 #Zahn Cup Zahn Cup

Viscosity range 20-250cSt; nozzle diameter 2.7mm; portable; stainless steel; meets ASTM D4212 standard.

Brand

SKU: NB018122

Pushen

Model

Zahn-2#

Get Quote

Pushen shopSE

Information

Datasheet Video Catalog Manual

What else did others buy

JFL QND-4 coated four cups

$ 127.00
Rhopoint RL-A-FC-ISO8 ISO flow cup (8mm) BS EN ISO 2431, ASTM D5125

$ 385.00
QND-4B coated 4 Viscosity Cups YONGLIDA Coating inks Aluminum coated 4 Viscosity Cups

$ 122.00
YONGLIDA FORD-2 Ford Viscosity Cup varnish viscosity measurement cup

$ 161.00
QNB ISO Flow Cup set YONGLIDA contains 3, 4 and 6 Flow Cups

$ 229.00

Genuinegoods

Pushen Zahn-2# Zahn CupOverview
Specifications
Comments
FAQs

Zahn-2#

Zahn Cup

Viscosity range 20-250cSt; nozzle diameter 2.7mm; portable; stainless steel; meets ASTM D4212 standard.

Zahn Cup

It can be used anywhere in factories, workshops and laboratories to quickly check the viscosity of fluids.

Each cup has a 30 cm long ring handle that can be held by hand to submerge the cup in the liquid.

There is a ring in the center of the handle to keep the cup vertical during the test.

Pushhen Zahn-2# Zahn Cup Details Figure 1

Pushhen Zahn-2# Details of Zahn Cup 2

Pushen Zahn-2# Zahn Cup Details Figure 3

Standards

ASTM D 4212

Comparison of parameters of PS ZAHN Cup series

model	cup number	outflow aperture	Measuring range	outflow time
PS 1024/1	number 1	2	5-60	35-80
PS 1024/2	number 2	2.7	20-250	20-80
PS 1024/3	number 3	3.8	100-800	20-80
PS 1024/4	No 4	4.3	200-1200	20-80
PS 1024/5	Number 5	5.3	400-1800	20-80
Unit: mm, cSt, s
Other parameters
Standards	ASTM D 4212
material	Stainless steel

Pushen Zahn-2# Zahn CupSpecifications

LIST	VALUE
Viscosity range	20~250cSt
outflow time	20~80s
Flow hole diameter	2.7mm
Cup body material	stainless steel
Filter material	stainless steel
Handle material	stainless steel
Applicable standard	ASTM D4212
Environment temperature	25℃±0.2℃
Certificate	without

Pushen Zahn-2# Zahn Cup Packing list

Zahn Cup X1, instruction manual X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Zahn Zahn Cup in the cosmetics industry?

[A]

In the cosmetics industry, the Zahn Zahn Cup is commonly used for the measurement of the viscosity of cosmetic products such as emulsions and serums to ensure that their applicability and feel meet the requirements, and can also be used for liquid viscosity control during the preparation process.

[Q]

How to handle high temperature liquids when using Zahn Zahn Cup?

[A]

For high-temperature liquids, the liquid can be cooled to the test temperature by placing it in a constant-temperature water bath, and then tested to ensure the accuracy of the test results.

[Q]

What is the use of the rings on the cup of the Zahn Zahn Cup?

[A]

There is a ring in the center of the handle to keep the cup vertical during testing. Each cup has a 30cm-long ring handle that allows the cup to be immersed in liquid by holding it with your hand.

[Q]

Is there any correlation between outflow time and viscosity range?

[A]

Yes, the outflow time is positively correlated with the viscosity of the liquid being tested. In general, liquids with higher viscosity have a longer outflow time, while liquids with lower viscosity have a shorter outflow time.

[Q]

Are the Pushin Zahn cups made of stainless steel?

[A]

Hello, yes. Compliant with ASTM D4212 standard.