RK K101.10.0 coater special rod No. 0 WFT 4μm

UK RK coater special wire rod K101.10.0 is a white handle 0 wire rod, dedicated to KPA101 coater, K101.10.0 Spreader wet film thickness of 4 microns, rod long tail 410mm.

Brand

SKU: NB018131

Model

K101.10.0

Price

$ 189.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

RK shopSE

Information

Datasheet RFQ Contract Catalog Manual

What else did others buy

Japan OSP-22/400 coating rod WFT 22μm length 400mm

$ 172.00
Japan OSP-18/250 formed applicator rod WFT 18μm length 250mm

$ 152.00
RDS13 #3/8 "Proofing rod WFT 30μm Length 400mm

$ 161.00
RDS 19 #3/8 "Gravure Applicator rod WFT 43.4μm Length 400mm

$ 161.00
Pushen XB-I 30μm Wire Bar, Length 240mm

$ 97.00

Genuinegoods

RK K101.10.0 Wire rodOverview
Specifications
Comments
FAQs

K101.10.0

Wire rod

Introduction

RK wire rods are used to apply precise, repeatable surface coatings to most substrates. Rice bars are manufactured by winding precision drawn stainless steel wire onto a stainless steel rod, creating a pattern of identically shaped grooves, with the wet film thickness accurately controlled by the size of these grooves. The closed wound rod can apply coating thicknesses from 4 to 120 Î¼m. Spiral wound wire rods can be applied with higher thickness coatings up to 500Î¼m.

British RK coating machine special wire bar K101.10.0

Wire rod size chart

Dimensional drawing of K101.10 special wire rod for coating machine

plan

British RK coating machine special wire bar K101.10.0 display picture

Optional

Note: Click on the accessory image to view product details.

RK K101.10.0 Wire rodSpecifications

LIST	VALUE
Production process	Wire-wound
WFT	4μm
diameter	9.5mm
Total length	420mm
Wire diameter	0.05mm
Application width	220mm
material	stainless steel

RK K101.10.0 Wire rod Packing list

Applicator rod × 1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Which model of Spreader is this coater rod used by UK RK?

[A]

Hello, this is for KPA101 Spreader film.

[Q]

Is there a GB/T13217.1 standard wire rod?

[A]

This RK cable stick is fine!

[Q]

Can this coating rod be prepative of multi-layer ultra-thin film?

[A]

The wire rod can be prepared for 1.5 micron ultra-thin film. Everyone must know it, but another advantage of it is multi-layer film, which is much better than I-shaped film applicator. But multi-layer film tests the flatness of the previous layers of film drying. Generally, the film thickness (such as less than 10 microns/layer) is too thin to control. The wire rod with Film Applicator is a very good solution, eliminating the problem of uneven pressure and speed of hand scraping.

+RK K101.10.0 Wire rod Big data

+RK K101.10.0 Wire rodSimilar products

Japan OSP-04/60 Applicator rod WFT 4μm length 60mm
$ 115.00
Compare

+RK K101.10.0 Wire rodKnowledge

Application of Mayer Rods in 2D Single Crystal Copper Nanosheet Films

+RK K101.10.0 Wire rodStandard

+Navigation