RK K101.10.1 Coater special rod No. 1 WFT 6μm

UK RK coater special wire rod K101.10.1 is a yellow handle No. 1 wire rod, dedicated to KPA101 coater, K101.10.1 Spreader wet film thickness of 6 microns, rod length 410mm.

Brand

SKU: NB018132

Model

K101.10.1

Price

$ 178.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

RK shopSE

Information

Datasheet RFQ Contract Catalog Manual

What else did others buy

Wet film scraping rod 25μm Printing ink coating rod, stainless steel color developing rod, easy to clean continuous wire

$ 110.00
UK RK KHC.10.8 coating rod WFT 100μm blue rubber head No. 8 rod

$ 153.00
Japan OSP OSP-330T L60 Applicator rod wire-wound drawdown Bar WFT 330μm Length 60mm

$ 116.00
RDS 135G #3/8 "Gap Applicator rod wire-wound wire-wound drawdown Bar 308.6μm

$ 173.00
American RDS 15 #1/4 "wide-wound color bar film thickness 34.3μm

$ 156.00

Genuinegoods

RK K101.10.1 Wire rodOverview
Specifications
Comments
FAQs

K101.10.1

Wire rod

Introduction

RK wire rods are used to apply precise, repeatable surface coatings to most substrates. Rice bars are manufactured by winding precision drawn stainless steel wire onto a stainless steel rod, creating a pattern of identically shaped grooves, with the wet film thickness accurately controlled by the size of these grooves. The closed wound rod can apply coating thicknesses from 4 to 120 Î¼m. Spiral wound wire rods can be applied with higher thickness coatings up to 500Î¼m.

Display picture of K101.10.1 special wire bar for British RK coating machine

Wire rod size chart

Dimensional drawing of K101.10 special wire rod for coating machine

plan

Display picture of K101.10.1 special wire bar for British RK coating machine

Optional

Note: Click on the accessory image to view product details.

RK K101.10.1 Wire rodSpecifications

LIST	VALUE
Production process	Wire-wound
WFT	6μm
diameter	9.5mm
Total length	420mm
Wire diameter	0.08mm
Application width	220mm
material	stainless steel

RK K101.10.1 Wire rod Packing list

Applicator rod X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Can this rod be applied to GB/T13217.1?

[A]

[Q]

Can this coating rod be prepative of multi-layer ultra-thin film?

[A]

The wire rod can be prepared for 1.5 micron ultra-thin film. Everyone must know it, but another advantage of it is multi-layer film, which is much better than I-shaped film applicator. But multi-layer film tests the flatness of the previous layers of film drying. Generally, the film thickness (such as less than 10 microns/layer) is too thin to control. The wire rod with Film Applicator is a very good solution, eliminating the problem of uneven pressure and speed of hand scraping.

[Q]

Can silicone coatings be applied to quartz Glass substrates?

[A]

Yes, choose quartz Glass as the substrate, with Mayer Rods Coating prepared above coated on the surface of the treated quartz Glass substrate, at room temperature to evaporate the solvent into the oven, at a certain temperature curing film formation.

+RK K101.10.1 Wire rod Big data

+RK K101.10.1 Wire rodSimilar products

Japan OSP-06/60 Applicator rod WFT 6μm length 60mm
$ 116.00
Compare

+RK K101.10.1 Wire rodKnowledge

Application of Mayer Rods in 2D Single Crystal Copper Nanosheet Films

+RK K101.10.1 Wire rodStandard

+Navigation