RK K303.10.1 No. 1 coater wire rod K303 coater special film thickness 6μm

UK RK1 coater rod K303.10.1 is K303 coater special rod, yellow handle, film thickness is 6μm, K303.10.1 Wire diameter is 0.08mm, Total length is 58.5cm.

Brand

SKU: NB018156

Model

K303.10.1

Price

$ 192.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

RK shopSE

Information

Datasheet RFQ Contract

What else did others buy

Genuinegoods

RK K303.10.1 Wire rodOverview
Specifications
Comments
FAQs

K303.10.1

Wire rod

Introduction

RK wire rods are used to apply precise, repeatable surface coatings to most substrates. Rice bars are manufactured by winding precision drawn stainless steel wire onto a stainless steel rod, creating a pattern of identically shaped grooves, with the wet film thickness accurately controlled by the size of these grooves. The closed wound rod can apply coating thicknesses from 4 to 120 Î¼m. Spiral wound wire rods can be applied with higher thickness coatings up to 500Î¼m.

The British RK coater K303 has a coating area of ââ700x420mm. This coater wire bar is specially used for the K303 coater.

British RK1 coating machine wire bar K303.10.1 with coating machine display

K303 coating machine wire bar dimensions

plan

British RK1 coating machine wire rod K303.10.1 display picture

Optional

Note: Click on the accessory image to view product details.

RK K303.10.1 Wire rodSpecifications

LIST	VALUE
Production process	Wire-wound
WFT	6μm
diameter	12.7mm
Total length	585mm
Wire diameter	0.08mm
Application width	420mm
material	stainless steel

RK K303.10.1 Wire rod Packing list

Applicator rod X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Can the RKK303.10.1 cable stick meet the GB/T13217.1 standard?

[A]

Applicable, you can consult the customer service of the mall for details about the GB/T13217.1 standard.

[Q]

Can this coating rod be prepative of multi-layer ultra-thin film?

[A]

The wire rod can be prepared for 1.5 micron ultra-thin film. Everyone must know it, but another advantage of it is multi-layer film, which is much better than I-shaped film applicator. But multi-layer film tests the flatness of the previous layers of film drying. Generally, the film thickness (such as less than 10 microns/layer) is too thin to control. The wire rod with Film Applicator is a very good solution, eliminating the problem of uneven pressure and speed of hand scraping.

[Q]

Can silicone coatings be applied to quartz Glass substrates?

[A]

Yes, choose quartz Glass as the substrate, with Mayer Rods Coating prepared above coated on the surface of the treated quartz Glass substrate, at room temperature to evaporate the solvent into the oven, at a certain temperature curing film formation.

+RK K303.10.1 Wire rod Big data

+RK K303.10.1 Wire rodSimilar products

Japan OSP-06/60 Applicator rod WFT 6μm length 60mm
$ 115.00
Compare

+RK K303.10.1 Wire rodKnowledge

+RK K303.10.1 Wire rodStandard

+Navigation