PUSHEN GKL-II initial drying anti-crack Tester
Used for the determination of cracking resistance performance of laminated architectural coatings, equipped with handheld Anemometer measurement of wind speed, Fan Power 100W, wind speed in wind tunnel 3 + 0.3m/s, anemometer range 0~10m/s.
Pushen
GKL-II
-
TRUIT TR 5262 anti-cracking fatigue Tester
$ 5356.00 -
JINGKELIAN QDK automatic dynamic anti-cracking Tester
$ 577.00 -
JFL QKL initial drying crack resistance testing machine
$ 472.00 -
JFL QDK type, automatic dynamic anti-cracking Tester
$ 638.00 -
YONGLIDA QDK automatic dynamic anti-crack Tester, top blade length 150mm
$ 599.00
Introduction
GKL-II dry anti-crack Tester is a special instrument designed and manufactured according to the provisions of GB9779-88 "Multilayer Architectural Coatings" on the initial dry anti-crack test. It is mainly used for the determination of the initial drying crack resistance of multi-layer architectural coatings. The instrument uses an axial flow fan to supply air, and the wind speed can be adjusted steplessly.
GKL-II initial drying anti-crack Tester is mainly used for the determination of the initial drying anti-cracking performance of multi-layer architectural coatings. The instrument consists of a fan, a wind tunnel and a bracket. The cross section of the wind tunnel is square. Configure a handheld anemometer to measure wind speed.
Standards
GB/T9779
Shipping List
Crack Tester
wind speed controller
Anemometer
Pushen GKL-II Initial drying crack TesterSpecifications
| LIST | VALUE |
|---|---|
| Fan power | 100W |
| Wind speed in wind tunnel | 3+0.3m/s |
| Anemometer range | 0~10m/s |
| Shipment size | 1000*300*360mm |
| Shipment Weight | 20KG |
| Controller size | 240*210*110mm |
| Standards | GB/T 9779-88 |
Pushen GKL-II Initial drying crack Tester Packing list
Anti-crack tester X1, wind speed controller X1, Anemometer X1, instruction manual X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Combined pencil Hardness Tester operating instructions
- Shanghai Pushen pushen film preparation instrument selection table [selection]
- Pushen KTQ Micrometer Film Applicator
- A good manual Ink Proofer from domestic (CN)
- ActiveJG/T 298-2010
- Active 901-2021
- Active 10254-2022
- AbolishGB 15442.1-1995
- ActiveGB 28375-2012
- ActiveGB 12441-2018
- ActiveGB 14907-2018
- ActiveGB/T 14907-2018
- ActiveJG/T 24-2018
- ActiveGB/T 9779-2015
- AbolishGB 14907-2002
- ActiveGB/T 23455-2009
- ActiveGB 28374-2012
- ZB 51004-1985
- AbolishGB/T 12441-1998
- AbolishGB/T 14907-1994