PUSHEN LPQ 100-1000 levelling Tester 100~1000 microns
Levelling test; 100~1000 μm; stainless steel; 5 grooves.
Pushen
LPQ 100-1000
LPQ 250-4000
-
QAG-1 leveling instrument YONGLIDA film 100~500μm
$ 156.00 -
MODERNER LPQ-1 Levelling Applicator WFT 100~1000μm
Login -
TQC VF2246 levelling sag levelling performance 5 kinds of film thickness sag performance 10 kinds of film thickness, including calibrating certificate
$ 1126.00 -
MODERNER LPQ-2 Levelling Applicator WFT 250~4000μm
Login -
QAG-3 levelling Tester YONGLIDA 250~4000 μm WFT
$ 148.00
Introduction
In most cases, leveling is a desired property of a paint.
It is manifested in the flatness of the dry film surface as much as possible and as few surface brush marks, spray spots and other unevenness as possible.
test steps
The paint to be tested was applied to a flat substrate by leveling to produce 5 pairs of streaks for various film thicknesses.
Keep the test panel in a horizontal position and observe which of the stripes are close together,
Usually, when the two stripes are close together, there is still a gap in the middle, and the gap used in this position is the leveling position.
Pushen LPQ 100-1000 Levelling TesterSpecifications
| LIST | VALUE |
|---|---|
| groove depth | 100-200-300-500-1000μm |
| Number of grooves | 5 pairs |
Pushen LPQ 100-1000 Levelling Tester Packing list
Levelling tester X1, instruction manual X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Combined pencil Hardness Tester operating instructions
- Shanghai Pushen pushen film preparation instrument selection table [selection]
- Pushen KTQ Micrometer Film Applicator
- A good manual Ink Proofer from domestic (CN)