PUSHEN LPQ 250-4000 levelling Tester 250~4000 microns
The LPQ 250-4000 has five grooves and ranges of 250 μm, 500 μm, 1000 μm, 2000 μm, and 4000 μm. The LPQ levelling Tester is made of stainless steel.
Pushen
LPQ 250-4000
LPQ 100-1000
-
TQC VF2246 levelling sag levelling performance 5 kinds of film thickness sag performance 10 kinds of film thickness, including calibrating certificate
$ 1126.00 -
MODERNER LPQ-1 Levelling Applicator WFT 100~1000μm
Login -
PUSHEN LPQ 100-1000 levelling Tester 100~1000 microns
$ 165.00 -
JFL QLP paint levelling scratch Tester
$ 172.00 -
TR 3080/1 Coating Levelling Applicator 100/200/300/500/1000μm
$ 172.00
Introduction
In most cases, leveling is a desired property of a paint.
It is manifested in the flatness of the dry film surface as much as possible and as few surface brush marks, spray spots and other unevenness as possible.
test steps
The paint to be tested was applied to a flat substrate by leveling to produce 5 pairs of streaks for various film thicknesses.
Keep the test panel in a horizontal position and observe which of the stripes are close together,
Usually, when the two stripes are close together, there is still a gap in the middle, and the gap used in this position is the leveling position.
Standards
Leveling Applicator
user's Guide
Pushen LPQ 250-4000 Levelling TesterSpecifications
| LIST | VALUE |
|---|---|
| groove depth | 250-500-1000-2000-4000µm |
| Number of grooves | 5 pairs |
Pushen LPQ 250-4000 Levelling Tester Packing list
Levelling tester X1, instruction manual X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Combined pencil Hardness Tester operating instructions
- Shanghai Pushen pushen film preparation instrument selection table [selection]
- Pushen KTQ Micrometer Film Applicator
- A good manual Ink Proofer from domestic (CN)