PUSHEN LG 450-1000 Sag Tester 450-1000 μm
Range 450-1000μm; in line with GB, ISO, ASTM standards; 50/100μm Graduation, the number of grooves 10.
Pushen
LG 450-1000
LG 250-475
LG 50-275
-
JINGKELIAN QAG Paints sagging Tester for relative sagging tests
$ 396.00 -
PUSHEN LG 450-1000 Sag Tester 450-1000 μm
$ 152.00 -
TRUIT TR 3060/1 Coating Sag Applicator
$ 141.00 -
QAG 50-275 Anti-Sag Meter YONGLIDA 50~275μm film thickness
$ 148.00 -
PUSHEN LG 50-275 Sag Tester, groove depth 50-275 μm
$ 152.00
Introduction
Sag is considered a paint defect, especially on vertical surfaces, edges and corners of the workpiece. Common terms such as streaks or tear stains describe this flawed appearance very vividly.
Series Specifications
| order number | groove depth | Division value |
| PS 2522/1 | 50-275μm | 25μm |
| PS 2522/2 | 250-475μm | 25μm |
| PS 2522/3 | 450-1000μm | 50/100μm |
| Other parameters | ||
| Standards | GB/T 9264, ISO 16862, ASTM D 4400, D 3730 | |
| number of grooves | 10 | |
test steps
Ten stripes of various film thicknesses were produced with sag coating.
Immediately after coating, place the test panel in a vertical position with the thinnest film stripe on top and avoid vibration. The convergence of the stripes depends on the tendency to sag.
It is very difficult to reproduce the results of the experiment.
It is very important to ensure the following conditions in the test: stable climate environment, uniformity of coating film, and set evaluation time.
Standards
GB/T 9264
ISO 16862
ASTMD 4400, D 3730
Pushen LG 450-1000 SAG TesterSpecifications
| LIST | VALUE |
|---|---|
| Film thickness range | 450 ~ 1000µm |
| Graduation | 50 / 100µm |
| Number of grooves | 10 |
Pushen LG 450-1000 SAG Tester Packing list
SAG tester X1, instruction manual X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Combined pencil Hardness Tester operating instructions
- Shanghai Pushen pushen film preparation instrument selection table [selection]
- Pushen KTQ Micrometer Film Applicator
- A good manual Ink Proofer from domestic (CN)
- Active 10302-2023
- Active 052-2021
- ActiveGB/T 27806-2011
- ActiveHG/T 4340-2012
- ActiveASTM D7514-2022
- ActiveASTM D4400-2018
- ReplacedASTM D 4400-1999
- ActiveJB/T 6886-2010
- ActiveGB/T 9264-2012
- ActiveGB/T 9264-2012
- ActiveGB/T 9264-2012