MODERNER LG-4 Sag Applicator Sag Applicator 650-875 μm

Main Specifications of LG-I Sag Applicator

Model: LG-4

Specification: 650~875μm

Groove difference: 25μm

Applicable scope of LG-I Sag Applicator

The sagging Tester is mainly used to measure the relative sagging of colored paints and provide Specifications for the on-site construction of colored paints. This instrument conforms to GB9264 "Determination of Sag Property of Colored Paint". This instrument is not suitable for testing the sag property of varnish and powder coating.

Product picture of LG-I Sag Applicator

How to use LG-I Sag Applicator

(1) Prepare the test plate: use a glass plate with a flat and smooth surface of 200mm×120mm×2~3mm.

(2) Put the test plate flat on the platform, be careful not to slide, place the instrument on the top of the test plate, fully stir the sample, put a sufficient amount of sample at the opening in front of the instrument, and hold the two ends of the instrument with both hands , moving from front to back smoothly and continuously, completing this operation within 2-3 seconds.

(3) Immediately place the coated test panel vertically. When placing, the strip film should be horizontal and keep "thin at the top and thick at the bottom".

(4) After the surface of the coating film is dry, observe its sagging situation. If the coating film of this thickness does not flow into the film of the next thickness, it means that the coating film of this thickness does not sag.

SAG Tester X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.