Defelsko RTRCHKSHIM04 PosiTector RTR calibration shim
The Defelsko RTRCHKSHIM04 calibration shim is used for PosiTector RTR Roughness Gauge calibrating, and the RTRCHKSHIM04 thickness is 60 microns.
Defelsko-
IPRE Ipre SR130 Groove Sensors
$ 478.00 -
TQC LD2050 surface roughness comparator
$ 490.00 -
Surface roughness Tester KAIRDA NDT110 Metal and Non-metallic parts surface roughness testing instrument
Login -
Roughness Gauge Probes (Sensors) KAIRDA KS131 Deep Groove Probe
Login -
LANDTEK SRT-6210 Surface Roughometer Needle Radius 5μm measurement Ra/Rz/Rq/Rt value
$ 964.00
Introduction
Defelsko RTRCHKSHIM04 calibration plates are used to check PosiTector RTR peak accuracy (RTR H and RTR 3D). Each probe contains an inspection spacer.
Adjusts the specified thickness based on the replica tape offset value.

Defelsko RTRCHKSHIM04 Gasket setSpecifications
| LIST | VALUE |
|---|---|
| Measurement range | 60μm |
Defelsko RTRCHKSHIM04 Gasket set Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- New: Defelsko PosiTest CH cross-cut adhesion Tester
- Application scheme of coating thickness test on wood board [with test video]
- Curved plastic coating thickness test application scheme [with test video]
- PosiTector200C ultrasonic coating Thickness Gauge on concrete coating thickness measurement application
- Defelsko PosiTector 200 Ultrasonic coating Thickness Gauge Chinese version Instructions for use [2023 new version]
- Appearance evolution of Defelsko coating Thickness Gauge to see the progress of industrial testing instruments
- Defelsko PosiTector 6000 coating Thickness Gauge Chinese version Instructions for use [2023 new version]
- Calibration Terms - Coating Thickness Gages
- Application of Defelsko PosiTest OTL furnace temperature Recorder in curing index testing
- Measure gloss with a PosiTector GLS gloss meter


RTRCHKSHIM04





