Defelsko DOLLY10 kit 10mm PosiTestAT
The size of the Defelsko DOLLY10 kit is 10mm, which is a special kit for PosiTestAT drawing adhesion instrument. The minimum pressure of the DOLLY10 kit is 2.8MPa.
Brand
SKU: NB018305
DefelskoModel
DOLLY10
DOLLY10APK100
VS
What else did others buy
Genuinegoods
Introduction
The spindle isAn essential accessory to the PosiTestAT Pull-Off Adhesion Tester, it is available in a variety of different sizes, each with different pull-out strengths.
The size of the Defelsko DOLLY10 spindle is 10mm, and the starting pressure is 2.8MPa.
Tablet pull-out strength
| Spindle size(mm) | Start-up pressure | Maximum pull-out pressure (AT-M) | Maximum pull-out pressure (AT-A) |
| 10mm | 400psi（2.8MPa） | 10000psi（70 MPa） | 14000psi（96 MPa） |
| 14mm | 200psi（1.4MPa） | 6000psi（40 MPa） | 7000psi（50 MPa） |
| 20mm | 100psi（0.7MPa） | 3000psi（20 MPa） | 3500psi（24 MPa） |
| 50mm | 50psi（0.4MPa） | 500psi（3.5 MPa） | 560psi（3.8 MPa） |
VS
Defelsko DOLLY10 KitSpecifications
| LIST | VALUE |
|---|---|
| Kit diameter | 10mm |
| Range | 2.8~70MPa |
| quantity | 10. |
Defelsko DOLLY10 Kit Packing list
Kit x10
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
[Q]
Can this spindle be suitable for GB/T5210?
[A]
OK
+Defelsko DOLLY10 Kit Big data
+Defelsko DOLLY10 KitKnowledge
- New: Defelsko PosiTest CH cross-cut adhesion Tester
- Application scheme of coating thickness test on wood board [with test video]
- Curved plastic coating thickness test application scheme [with test video]
- PosiTector200C ultrasonic coating Thickness Gauge on concrete coating thickness measurement application
- Defelsko PosiTector 200 Ultrasonic coating Thickness Gauge Chinese version Instructions for use [2023 new version]
- Appearance evolution of Defelsko coating Thickness Gauge to see the progress of industrial testing instruments
- Defelsko PosiTector 6000 coating Thickness Gauge Chinese version Instructions for use [2023 new version]
- Calibration Terms - Coating Thickness Gages
- Application of Defelsko PosiTest OTL furnace temperature Recorder in curing index testing
- Measure gloss with a PosiTector GLS gloss meter
+Defelsko DOLLY10 KitStandard
- ActiveSH/T 3022-2019
- ActiveASTM D7234-2012
- ActiveGB/T 39289-2020
- ActiveHG/T 2454-2014
- ActiveASTM B571-2023
- ActiveISO 4624-2016
- ActiveGB/T 14616-2008
- ActiveGB/T 9260-2008
- ActiveGB/T 5210-2006
+Navigation