COATTEST INSTRUMENT DJH-D Electrolytic Thickness Gauge platings thickness measurement instrument 0.01 μm resolution
It can measure single-layer and composite multi-layer platings, with a minimum measurable size of φ 1.7mm and a resolution of 0.01μm. It supports chromium, nickel, copper and other metal platings measurement, and is basically not limited by the substrate.
COATTEST INSTRUMENT
DJH-D
DJH-E
-
COATTEST INSTRUMENT DJH-D Electrolytic Thickness Gauge platings thickness measurement instrument 0.01 μm resolution
$ 1190.00 -
COATTEST INSTRUMENT DJH-G (STEP) Electrolytic Thickness Gauge Multilayer Nickel Potential Difference and Thickness Tester, Stand-alone Connectivity dual-use
$ 2869.00 -
Material Assurance Instrument DJH-E Electrolytic Thickness Gauge Coulomb Thickness Gauge with Printing Function
$ 1314.00
Scope of application
Applicable fields: automobile and motorcycle industry, aerospace and navigation industry, bicycle industry, electronic and electrical industry, daily hardware industry, sanitary ware and sanitary ware industry, plastic electroplating industry, neodymium-iron-boron industry, standard parts industry, technical supervision departments and scientific research institutions.
Product Usage:Single or composite multi-layer thickness measurement
Additional information
The thickness gauge is calibrated from the factory, and if you need a plated calibration plate (made in the United States), you need to purchase it separately
COATTEST INSTRUMENT DJH-D Electrolytic Thickness GaugeSpecifications
| LIST | VALUE |
|---|---|
| Measurement of plating | Standard configuration: chromium, nickel, copper, zinc, tin, silver, gold and other metal platings, composite platings (such as Cr/Ni/Cu), if you need to measure Miscellaneous platings, please ask in advance |
| Platings substrate | Metal, plastic, brass, zinc alloy, NdFeB, ceramics (basically not limited by the substrate) |
| Number of coating layers | Single layer and composite multi-layer |
| Minimum measurable size | φ 2.4mm and φ 1.7mm two sizes are standard, the plane is more than 3mm * 3mm, and the diameter of the circular shaft is more than 6mm. If you measure a smaller size workpiece, please submit it in advance. |
| Measurement range | 0~ 300μm (the use range is 0.03~ 50um, beyond 50um, the error will gradually increase) |
| Indication Error | ≤±10% |
| reproducibility | ≤5% |
| resolution | 0.01μm |
| power supply | AC 220V +/- 10%, 50/60Hz, 30W |
COATTEST INSTRUMENT DJH-D Electrolytic Thickness Gauge Packing list
Host X1, test rack X1, electrolysis solution (120ml) X4, dropper X10, eraser X1, forceps X1, paper towel X1, test rack fastening wrench X1, manual X1, warranty card X1, certificate X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Specific operation steps of the three methods of surface contour measurement
- Copper platings thickness measurement solution
- How to Select Electrolytic Thickness Gauges Scientifically? Key Factors and Practice Guidelines
- Electrolytic Thickness Gauge and Magnetic Induction Thickness Gauge?
- ActiveGB/T 4955-2005
- ActiveISO 4526-2004
- ActiveASTM B764-2021
- ActiveJB/T 10534-2005
- AbolishGB/T 12305.1-1990
- ActiveGB/T 12599-2002