TQC SHEEN SH605 (Ref605) Buchholz indentation Tester
The TQC SHEEN SH605 Buchholz indentation Tester is used to test the indentation resistance of coatings and varnishes. The SH605 indentation Tester comes standard with a 20x magnification Microscope, which meets ISO standards.
TQC sheen
SH605
-
TQC SP1900 Brinell indentation hardness meter, in line with ISO2815 standard
$ 1773.00 -
TQC VF6500 GYZJ-934-1 Pap Hardness Tester
$ 2776.00 -
JINGKELIAN QHY Buchholz indentation Tester for the determination of the technical characteristics of the film Hardness test
$ 313.00 -
PUSHEN QHY Buchholz indentation Tester
$ 335.00 -
JFL QHY Buchholz indentation
$ 347.00
Introduction
This indentation Tester is used to evaluate the indentation resistance (hardness) of single or multi-coat coating systems, varnishes and related products.
Test Method:
Place the gauge on the coated surface and subsequently peel off after 30 sec to allow the coating to recover for 35 sec, place a 20x magnification microscope in the indentation by locating the indentation using the template provided, where the length of the indentation can be measured with a scale ruler. Indentation resistance is obtained by the formula 100/indentation length.
Products include:
Buchholtz Indentation Tester
20x magnification microscope
Battery: 1.5V AA type (x2)
template
case
Operator's manual
International standards
BS EN ISO 2815：2003
TQC sheen SH605 Buchholz indentation TesterSpecifications
| LIST | VALUE |
|---|---|
| Microscope | × 20 times |
| Weight | 500g |
| meet the standard | BS EN ISO 2815：2003 |
TQC sheen SH605 Buchholz indentation Tester Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.