Erichsen504 drying time meter

German Elixin ERICHSEN504 drying time gauge principle:

The probe moves across the surface of the coating film at a definite velocity, and the trajectory generated by the needle varies depending on the level of drying. Different drying periods are defined by calculating time and trajectory characteristics.

Design & Features

1 The instrument is composed of a metal substrate with a covering plate, which acts as a platform for six 300*25mm glass plates, the glass plates are coated and the six needles are fixed on a support made of steel.

The 2 On/off switch and control button for adjusting the run time (6, 12 or 24 hours) are located on one side of the mount, and the instrument is marked with 3 time scales, each representing different speeds.

3 The following trajectories are defined to match the degree of coating dryness:
--No trajectory The paint and needle move together
--Continuous trajectory No paint flow
--Diamond trajectory Initial surface drying
--Continuous trajectory on the surface Initial complete drying
--Interrupted trajectory No stickiness at the beginning
--No trajectory Initial drying is rapid

4. Move the mount with the test probe back by hand and place the needle back to the appropriate point to determine the time of each point, the relevant time tick is read from the time scale.

Elixin ERICHSEN504 Drying Time Meter Accessories:

1. It is recommended to use the Elixin Coater Model #360 to produce a uniform, 13 mm wide coating film on the glass strip. 2. Additional copper weights increase the pressure of the needle, so that the performance of particularly resistant paints and topcoats can be determined.

2. 
   

Specifications:

Dimensions: Height 83mm Width: 470mm Depth: 240mm

Net weight: about 5.5kg Voltage: 230VAC/50Hz Running length: 300mm

Running time 6, 12 or 24 hours (other operating hours available on request)

Ordering Information:
Order number         
0504.01.51 
Product name
Model 504 Drying Time Meter
The scope of supply includes:
[1] --- 6 glass strips      
[2] --- 6 test needles      
[3] ---1 English operating instructions

Accessories/Spare Parts Order Number Product Name
0046.01.31 Quadruple Coater 360 13mm Wide
0504.03.53 Copper weights (5 grams each) for test pins, 6 pcs
0504.01.53 Spare glass strips, 12 pieces
0504.02.53 Spare test pins, 12 pcs

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.