MODERNER RJD-10 Pressure sensitive adhesive solubility Tester

Introduction

The RJD-10 solubility Tester is designed to meet the needs of adhesive solubility measurement. It can also be used for bacterial culture, fermentation, hybridization and biochemical reactions as well as enzyme and cell tissue research that have high requirements on temperature and oscillation frequency.

main feature

RJD-10 pressure-sensitive adhesive solubility Tester is suitable for various biological and chemical laboratories that have high requirements for oscillation frequency and temperature accuracy.

●High-strength and high-performance mechanical transmission design, it can still run smoothly even under overload conditions.

●It has a power outage recovery function. After the external power supply suddenly loses power and comes back again, the equipment can automatically resume operation according to the original setting program.

●Double over-temperature protection design. When the water level of the heater component is too low and the test sample is over-temperature, the host can automatically cut off the heating power.

●Microprocessing chip PI type temperature control design, the temperature control has good linearity, small fluctuations, and the temperature uniformity reaches 0.1℃.

●The LCD displays the set temperature and actual temperature.

●With operating parameter memory function, it can avoid repeated and cumbersome operations.

●Microprocessor chip frequency control, LCD display shows the set frequency and actual frequency.

●Complete timing setting function, any time can be set between 1 minute and up to 500 hours. The timing endpoint equipment can automatically stop and issue audible and visual alarms.

●When the actual measured temperature deviates from the set temperature by 3℃, the host automatically stops heating and sounds an audible alarm.

●There is a drain valve on the side of the Water Bath.

●Imported stainless steel liner, stainless steel electropolished rocking plate, spring, and flask clamp.

●Flexible, convenient and detachable rocking plate assembly with various specifications.

Product display picture

Standards compliant

GB/T34716-2017 Determination of solubility of pressure-sensitive adhesives

Whole machine X1, flask X10, manual X1, certificate X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.