Shanghai PUSHEN NM-I wear Tester, dry abrasion Tester
Coating for testing wear resistance performance, can also be used to test the wear resistance of the substrate performance, Friction Frequency 60 +/- 1cpm, test stroke 90mm, dry abrasion instrument, no need to add chilling down liquid.
Pushen-
Swirl/spin Wear Measurement Instrument NBC-Taber5612 Wear resistance Tester
$ 1081.00 -
HUITAO HT-2285-4 quad station Martindale Wear resistance Tester
$ 2239.00 -
CHINA NBC-7123 IU Leather Wear testing machine Dry and wet friction resistance decolorization Tester
$ 957.00 -
Shanghai PUSHEN NM-I wear Tester, dry abrasion Tester
$ 1501.00 -
HUITAO HT- 2285-6 six-station Martindale Wear resistance instrument
$ 2434.00
Introduction
NM-I Abrasion Tester is used to test the wear resistance of coatings, and can also be used to test the wear resistance of substrates. Such as: paint, electroplating, fluorine coatings, flooring, wood density and other forms of surface properties. The instrument wears the paint painted on the standard test plate, and the number of wear can be read by the counter. According to the weight of the weight added during wear, the number of times and the degree of wear on the paint surface, the wear resistance of the paint substrate can be evaluated.
This product is a dry abrasion Tester, no need to add coolant. No more dust is generated, no dust suction device is required.
Applications
NM-I Abrasion Tester is used to test the wear resistance of coatings, and can also be used to test the wear resistance of substrates. Such as: paint, electroplating, fluorine coatings, flooring, wood density and other forms of surface properties. The instrument wears the paint painted on the standard test plate, and the number of wear can be read by the counter. According to the weight of the weight added during wear, the number of times and the degree of wear on the paint surface, the wear resistance of the paint substrate can be evaluated.

Pushen NM-I Wear resistance TesterSpecifications
| LIST | VALUE |
|---|---|
| Friction method | Reciprocating |
| Frictional contact form | face |
| friction load | 0~3kg |
| Friction frequency | 60±1cpm |
| test stroke | 90mm |
| Power | 220V AC 50Hz |
| Machine size | 660*450*400mm |
| Total Weight | 50kg |
| Motor power | 160W |
| Grinding head diameter | 50mm |
| Counting range | 1-9999 times |
| Test board size | >150×150mm |
Pushen NM-I Wear resistance Tester Packing list
Wear resistance tester X1, technical controller X1, load weight X6, equilibrating weight X1, instruction manual X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.


NM-I






