JFL STM- ⅲ Stormer Viscometer
Blade size 54 * 7.9 * 0.8mm, Measurement range 53~ 141KU, weight weight 5~ 500g, container specification φ 85 × 85mm, Dimension 220 * 220 * 390mm, instrument weight 10Kg.
JFL
STM-Ⅲ
-
JINGKELIAN QNZ Stormer Viscometer measurement viscosity KU value ASTM-D562 standard and GB9269-88 standard
$ 420.00 -
PUSHEN STM-IV Stormer Viscometer KU/G
$ 572.00 -
STM-IV Digital Stormer Viscometer YONGLIDA 40.2KU~ 141.0KU Viscosity Range
$ 760.00 -
JINGKELIAN STM-III Stormer Viscometer for determination of paints and Miscellaneous Coating consistency with KU value
$ 483.00 -
PUSHEN STM-V Stormer Viscometer KU/G/CP
$ 1042.00
Introduction
The STM-â ¢ Stormer Viscometer is a testing instrument suitable for measuring the viscosity of paints and other coatings that use KU values ââto express the viscosity. The design of this instrument follows the ASTM standard and the GB/T9269-88 standard. This viscometer is controlled by a single-chip microcomputer. The operator can directly read the KU value of the measured sample from the instrument without looking up the table.
JFL STM-Ⅲ Stormer ViscoMeterSpecifications
| LIST | VALUE |
|---|---|
| Blade size | 54*7.9*0.8mm |
| Measurement range | 53~141KU |
| Nominal Mass | 5~500g |
| Container size | Φ85×85mm |
| Dimensions | 220*220*390mm |
| Instrument Weight | 10Kg |
JFL STM-Ⅲ Stormer ViscoMeter Packing list
host X1, manual X1, certificate of conformity X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- What are the gloss meters that meet the GB/T9966 standard?
- What are the models of stone gloss meter? What is the difference?
- These gloss meters can be used in paper inspection, understand!
- How to choose the right model for Jinfulun JFL gloss meter?
- Jinfulun JFL-B60 Glossiness Meter instruction manual
- Study on uncertainty analysis of Moisture meter measurement results by drying method