QND-1 Viscosity cup
QND-1 Viscosity cup GB/T 1723-93 design. Suitable for measurement Coatings and other related products Conditional Viscosity (outflow time not less than 20 seconds). Under certain temperature conditions, measurement of the time for the full outflow of a quantitative sample from a hole of a specified diameter. Expressed by S.
JFL
QND-1
-
YONGLIDA FORD-5 Ford Viscosity Cup Flow Cup method
$ 164.00 -
TRUIT TR 1008/5 ISO standard Viscosity Cup φ5.0mm
$ 125.00 -
Rhopoint RL-A-FC-PTA6/B5 BS Flow Cup (4.76mm) BS 3900
$ 374.00 -
TQC VF2048 Coating Viscosity Cup ISO Flow Cup No. 3 with VF2061 bracket
$ 798.00 -
Japan TOYO TOYO 4 #Viscosity Cup Zahn Viscosity Cup Zahn Cup zahn second measuring cup
$ 183.00
Introduction
Designed according to GB/T 1723-93, it is suitable for measuring the conditional viscosity of coatings and other related products (outflow time is not less than 20 seconds). At a certain temperature, the total outflow of the specimen from the hole of the specified diameter is measured.
JFL QND-1 Viscosity cupSpecifications
| LIST | VALUE |
|---|---|
| Cylinder inner diameter | φ 51 ± 0.01mm |
| Cylinder bottom line to notch height | 46±0.2mm |
| Inner cone angle | 101°±30 |
| Flow hole length | 14±0.02mm |
| flow hole diameter | 5.6mm |
| Capacity | 50ml |
| material | Aluminum Note: To convert the outflow time (s) into kinematic viscosity centimeters (m m./s), please refer to the following formula: t = 0.053v + 1.0 t: outflow time (s) v: kinematic viscosity (mm./s) |
JFL QND-1 Viscosity cup Packing list
Bracket x1, flow cup x1, receiving cup x1, manual x1, certificate x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Viscosity measurement knowledge topic - Tu-1 cup
- What are the gloss meters that meet the GB/T9966 standard?
- What are the models of stone gloss meter? What is the difference?
- These gloss meters can be used in paper inspection, understand!
- How to choose the right model for Jinfulun JFL gloss meter?
- Jinfulun JFL-B60 Glossiness Meter instruction manual
- Study on uncertainty analysis of Moisture meter measurement results by drying method
- Method for Determination of Coating Viscosity by Zain Cup
- Method for Determination of Coating Viscosity by Zein Viscosity Cup