JFL QLP paint levelling scratch Tester
JFL QLP coating levelling scratch Tester is designed and manufactured according to ASTM and D2801 standards. The QLP coating levelling scratch Tester is generally used in conjunction with the Sag Tester to test the levelling (dispersion) and sag properties of the coating during construction and drying. In order to achieve the required surface effect, a comparative test is carried out.
JFL
QLP
Introduction
According to ASTM and D2801 standards, the QLP type paint leveling coating scraping Tester designed and manufactured is generally used in conjunction with the sagging Tester to test the leveling (dispersion) and sagging of the coating during construction and drying, and to achieve the required surface effect for comparative testing. Because it is a special test, it saves time, and can quickly test whether the product is qualified or not, so as to quickly adjust the formula.
JFL QLP Paint levelling coating scratch TesterSpecifications
| LIST | VALUE |
|---|---|
| groove depth | 0.1/0.2/0.3/0.5/1.0mm；0.25/0.5/1.0/2.0/4.0mm |
JFL QLP Paint levelling coating scratch Tester Packing list
Levelling scratch tester X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- What are the gloss meters that meet the GB/T9966 standard?
- What are the models of stone gloss meter? What is the difference?
- These gloss meters can be used in paper inspection, understand!
- How to choose the right model for Jinfulun JFL gloss meter?
- Jinfulun JFL-B60 Glossiness Meter instruction manual
- Study on uncertainty analysis of Moisture meter measurement results by drying method