JFL QTB putty flexibility Tester

JFL QTB putty flexibility Tester meets the standard GB/T1748-88, the test film metal bending film, the diameter of the shaft rod is 50mm, 100mm, the thickness of the test plate substrate is 0.2-0 mm, and the test plate substrate is made of tinplate.

Brand

SKU: NB019016

JFL

Model

Price

$ 222.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

JFL shopSE

Information

Datasheet RFQ Contract

What else did others buy

TRUIT TR 5240 Putty film flexibility Tester GB/T1748 standard

$ 345.00
JINGKELIAN QTX Film resilience Tester, determination of film flexibility

$ 128.00
MODERNER QTX film Flexibility Tester national standard GB1731

Login
JFL QTB putty flexibility Tester

$ 222.00
QTX film Flexibility Tester YONGLIDA shaft rod length is 35mm

$ 118.00

Genuinegoods

JFL QTB Putty flexibility TesterOverview
Specifications
Comments
FAQs

QTB

Putty flexibility Tester

Introduction

Application: To evaluate the flexibility of the paint film by its ability to deform with its substrate without damage under specified conditions
The test technique is specific: under the conditions specified in the standard, after bending the test plate, the diameter (mm) of the bending film when the putty film cracks and falls off

JFL QTB Putty flexibility TesterSpecifications

LIST	VALUE
meet the standard	GB/T1748-88
Film test	Metal curved film
Shaft rod size	Diameter 50mm, 100mm
Thickness of substrate	0.2-0.3mm
Test substrate material	Tackle iron plate

JFL QTB Putty flexibility Tester Packing list

host X1, manual X1, certificate of conformity X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

I want to test the flexibility of putty film, which instrument should I use?

[A]

The QTB putty flexibility tester can be used to evaluate whether the putty film is cracking or peeling when bent. The flexibility is quantified by measuring the diameter of the shaft rod during cracking. The operation is simple and the results are intuitive.

[Q]

What functions should be paid attention to when selecting a model?

[A]

For example, QTB provides 50mm and 100mm diameter shaft rods, which can simulate different degrees of bending; at the same time, it supports 0.2-0 film thickness tinplate test plates to ensure that the test is close to the actual application, which is convenient for you to test flexibly according to product requirements.

[Q]

Can the substrate tested by this putty flexibility tester use a 0.5mm thick tinplate?

[A]

Hello, this QTB putty flexibility tester can only measure 0.2~ 0.3mm Film thickness tinplate, can not test 0.5mm Film thickness tinplate.

[Q]

What is the diameter of the shaft rod size of the QTB Putty flexibility tester?

[A]

Hello, the diameter of the shaft rod is 50mm and 100mm.

[Q]

Is there a JT/T821.2 standard putty flexibility tester?

[A]

This JFL putty flexibility tester is fine!

+JFL QTB Putty flexibility Tester Big data

+JFL QTB Putty flexibility TesterSimilar products

+JFL QTB Putty flexibility TesterKnowledge

Flexibility Tester how to choose? Full analysis of key equipment for industrial material testing

+JFL QTB Putty flexibility TesterStandard

+Navigation

JFL QTB putty flexibility Tester

JFL QTB Putty flexibility TesterOverview

Introduction

JFL QTB Putty flexibility TesterSpecifications

JFL QTB Putty flexibility Tester Packing list

FAQ