RDS #0 Spreader Smooth Rods Diameter 1/2 "

RDS #0 Spreader Smoothing Rods are smooth and free wire-wound Spreader rods with a Total length of 400mm and an effective Spreader width of 30cm. They are imported Spreader rods made of stainless steel.

Brand

SKU: NB001902

RDS

Model

0# 1/2"

Price

$ 161.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

RDS shopSE

Information

Datasheet RFQ Contract Video

What else did others buy

Leneta 2A sealed Opacity Chart

$ 265.00
UK RK KHC.21 Drawdown Plate for Better Repeatability and Proofing

$ 240.00
Japan OSP S-16 wire brush Wire diameter 0.06mm

$ 130.00

Genuinegoods

RDS 0# 1/2" Applicator rod 1/2 "Overview
Specifications
Comments
FAQs

0# 1/2"

Applicator rod 1/2 "

RDS0# 1/2" coating rod is a smooth steel rod with 0μm coating thickness, without any steel wire or pressure groove wrapped around the surface. It is often used in the paper industry. Because of the RDS 0# 1/4" coating rod The thickness of the manual coating film is 0 μm, so it is often used to control the thickness of the coating film on the machine and let the machine do the coating.

plan

RDS 0# 1/2"coating stick display

RDS 0# 1/2"coating rod details

Optional

Note: Click on the accessory picture to view Details.

RDS 0# 1/2" Applicator rod 1/2 "Specifications

LIST	VALUE
WFT	0μm
diameter	12.7mm
Total length	400mm
Application width	300mm
Grip width	50+50mm
material	stainless steel
Wire diameter	0mm

RDS 0# 1/2" Applicator rod 1/2 " Packing list

Stainless Steel Rod X1 Transparent Encasement Hose X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

Do you have a smooth coating bar?

[A]

This one is it.

[Q]

Do you support customization? Such as wet film thickness and length?

[A]

Spreader rod length and main rod diameter support customization, but wet film thickness RDS has provided dozens of specifications covering more than 200 microns, and in principle does not accept customization.

[Q]

Can this coating rod be prepative of multi-layer ultra-thin film?

[A]

The wire rod can be prepared for 1.5 micron ultra-thin film. Everyone must know it, but another advantage of it is multi-layer film, which is much better than I-shaped film applicator. But multi-layer film tests the flatness of the previous layers of film drying. Generally, the film thickness (such as less than 10 microns/layer) is too thin to control. The wire rod with Film Applicator is a very good solution, eliminating the problem of uneven pressure and speed of hand scraping.

[Q]

Meet GB/T26461 Applicator rod

[A]

0 #1/2 "Applicator rod, please refer to it.

+RDS 0# 1/2" Applicator rod 1/2 " Big data

+RDS 0# 1/2" Applicator rod 1/2 "Similar products