LIULING CH-10-C Wire and cable thickness gauge 0~ 10mm
The thickness range of LIULING CH-10-C Wire and cable multi-head thickness gauge is 0~ 10mm, Graduation is 0.01mm. The CH-10-C Wire and cable multi-head thickness gauge meets the HG/T 2041-2009 standard.
LiuLing
CH-10-C
-
XINGHUO ZTT-950 pavement marking line Thickness Gauge
$ 276.00 -
LIULING CH-20 10kPa, 22kPa Benchtop Percent Special Gauge Thickness Gauge Ø 4 Upper Probe
$ 459.00 -
LIULING CH-30 Large Span Desktop Rubber Thickness Gauge 0mm~ 30mm
$ 475.00 -
LIULING CH-1-ST Plastic film sheet desktop thickness gauge 0~ 1mm
$ 257.00 -
LIULING CH-10-A φ 10mm upper probe, 100% hand rubber thickness gauge 0~ 10mm
$ 218.00
Introduction
Liuling CH-10-C Wire and Cable Multi-Head Thickness Gauge This gauge is mainly used to measure the thickness of cables, wires, and flexible wire insulation and sheath materials, as well as the thickness of vulcanized rubber and plastic products. It refers to the implementation of the national standard GB/T 2951.1-1997 "General Test Methods for Cable Insulation and Sheathing Materials, Part 1: General Test Methods, Section 1 Measurement of Thickness and Dimensions - Mechanical Performance Test", and also refers to the implementation of HG /T 2041-2009 "Technical Conditions for Rubber Thickness Gauge" industry standard of the Ministry of Chemical Industry. It has the characteristics of simple structure, convenient use and reliable quality.
LiuLing CH-10-C Wire and cable thickness gaugeSpecifications
| LIST | VALUE |
|---|---|
| Measurement range | 0~10mm |
| Measurement accuracy | ≤0.02mm |
| reading display | Pointer |
| Graduation | 0.01mm |
| Pressure and mass required | 20Kpa(160g)； 70Kpa(140g) 、20Kpa(40g)； 70Kpa(28g) |
| Probe diameter | φ 2mm; φ 5mm; (φ 10mm) 1 piece; (1mm × 4mm) 2 pieces |
| Meet the standard | HG/T 2041-2009 |
LiuLing CH-10-C Wire and cable thickness gauge Packing list
host X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- ActiveJJF 1488-2014
- ActiveGB/T 14831-2003
- ActiveJJG (轻工)50.3-2000
- ActiveJJG (轻工)50.2-2000
- ActiveASTM F2251-2023
- ActiveQB/T 1055-2004
- ActiveGB/T 7125-2014
- AbolishHG/T 2041-1991