LIULING CH-1-B Latex Thickness Gauge 0~ 1mm
The LIULING CH-1-B latex thickness gauge is a handheld thickness gauge with a thickness measurement range of 0 to 1mm. The CH-1-B latex thickness gauge can be used for sample measurement in physical laboratories, and the diameter of the probe is Ø 5mm.
LiuLing
CH-1-B
-
LIULING CH-20-AT Percent Benchtop Rubber Thickness Gauge 0mm~ 20mm
$ 296.00 -
LIULING CH-10 Rebound Hand Thickness Gauge 0mm~ 10mm
$ 347.00 -
LIULING CH-10-C Wire and cable thickness gauge 0~ 10mm
$ 304.00 -
KOSON KS-90 integrated floor Thickness Gauge, thickness measurement range 20~999mm
$ 913.00 -
LIULING CH-20 pointer, desktop percentile gauge thickness gauge, rubber plastic Film thickness measurement
$ 434.00
Introduction
This Thickness Gauge is an instrument for measuring the thickness of latex, rubber, paper, etc. It refers to the implementation of HG/T 2041-2009 "Technical Conditions for Rubber Thickness Gauge", HG/T 2198-2011 "General Requirements for Physical Test Methods of Vulcanized Rubber" and HG/T 2382-1992 "General Technical Conditions for Rubber Testing Instruments and Equipment" and other chemical Ministry of Industry Standards.
This instrument has the characteristics of simple structure, convenient use and reliable quality. There are two types of Thickness Gauges: hand type and table type: the hand type can be carried around, hand-held measurement, suitable for on-site measurement in the workshop; the table type can be used for sample measurement in the physical laboratory.
LiuLing CH-1-B Thousand part latex thickness gaugeSpecifications
| LIST | VALUE |
|---|---|
| Measurement range | 0~1mm |
| reading display | Pointer |
| Graduation | 0.001mm |
| Pressure and mass required | 22kPa±5kPa（44g±4g） |
| Probe diameter | φ 5mm (flat surface) |
| Meet the standard | HG/T 2041-2009 |
LiuLing CH-1-B Thousand part latex thickness gauge Packing list
host X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- ActiveJJF 1488-2014
- ActiveHG/T 2041-2009
- ActiveHG/T 4914-2016
- ActiveJJG (轻工)50.3-2000
- ActiveJJG (轻工)50.2-2000
- ActiveASTM F2251-2023
- ActiveQB/T 1055-2004
- ActiveGB/T 7125-2014
- AbolishHG/T 2041-1991