BOSEAN K-100 (EX-FR) Portable Gas Leak Detector
The BOSEAN K-100 portable gas leak Detector has a detection range of 0-3000 μmol/mol for testing combustible gas concentration, and the K-100 portable gas leak Detector can manually set the alarm point. Sensors have a lifespan of up to 24 months.
Bosean
K-100(EX-FR)
-
Empaer SPES-SO2 series handheld sulfur dioxide concentration Detector
$ 567.00 -
BH-90-SO2 Sulfur dioxide Gas Detector 0~20ppm
$ 226.00 -
GUOYUGRA GY/VGD-200-R404a-G high-precision refrigerant, refrigerant Detector 0-1000ppm
$ 1190.00 -
GUOYUGRA GY/VGD-200-HCN-G (0-10ppm) hydrogen cyanide Detector
$ 270.00 -
GUOYUGRA GY/VGD-200-CS2-G (0-50ppm) carbon disulfide Detector
$ 568.00
Introduction
Gas parameter table
| The gas to be measured | Measuring range | Selectable measuring ranges | resolution | Alarm point |
| Combustible gas EX | 0-100%lel | 0-100%vol (infrared) | 1%lel/1%vol | Low: 20 High: 50 |
| Oxygen O2 | 0-30%vol | 0-30%vol | 0.1%vol | Low: 19.5% High: 23.5%vol |
| Hydrogen sulfide H2S | 0-100ppm | 0-50/200/1000ppm | 1ppm | Low: 10 High: 20 ppm |
| Carbon monoxide CO | 0-1000ppm | 0-500/2000/5000ppm | 1ppm | Low: 50 High: 150 ppm |
| Carbon dioxide CO2 | 0-5000ppm | 0-1%/5%/10%vol (infrared) | 1ppm/0.1%vol | Low: 1000 High: 2000 ppm |
| Nitric oxide NO | 0-250ppm | 0-500/1000ppm | 1ppm | Low: 50 High: 150 ppm |
| NO2 nitrogen dioxide | 0-20ppm | 0-50/1000ppm | 0.1ppm | Low: 5 High: 10 ppm |
| Sulfur dioxide SO2 | 0-20ppm | 0-50/1000ppm | 0.1/1ppm | Low: 5 High: 10 ppm |
| Chlorine CL2 | 0-20ppm | 0-100/1000ppm | 0.1ppm | Low: 5 High: 10 ppm |
| Hydrogen H2 | 0-1000ppm | 0-500/2000/5000ppm | 1ppm | Low: 50 High: 150 ppm |
| Ammonia NH3 | 0-100ppm | 0-50/500/1000ppm | 0.1/1ppm | Low: 20 High: 50 ppm |
| Phosphine PH3 | 0-20ppm | 0-20/1000ppm | 0.1ppm | Low: 5 High: 10 ppm |
| HCL hydrogen chloride | 0-20ppm | 0-20/500/1000ppm | 0.1ppm | Low: 5 High: 10 ppm |
| Chlorine dioxide CLO2 | 0-50ppm | 0-10/100ppm | 0.1ppm | Low: 5 High: 10 ppm |
| Hydrogen cyanide HCN | 0-50ppm | 0-100ppm | 0.1/0.01ppm | Low: 10 High: 20 ppm |
| Ethylene oxide C2H4O | 0-100ppm | 0-100ppm | 1/0.1ppm | Low: 20 High: 50 ppm |
| ozone | 0-10ppm | 0-20/100ppm | 0.1ppm | Low: 2 High: 5 ppm |
| Formaldehyde CH2O | 0-20ppm | 0-50/100ppm | 1/0.1ppm | Low: 5 High: 10 ppm |
| Hydrogen fluoride HF | 0-100ppm | 0-1/10/50/100ppm | 0.01/0.1ppm | Low: 2 High: 5 ppm |
| Xylene/toluene | 0-20ppm | 0-1/10/50/100ppm | 0.01/0.1ppm | Low: 5 High: 10 ppm |
Bosean K-100(EX-FR) Portable gas leak DetectorSpecifications
| LIST | VALUE |
|---|---|
| Range | 0~3000μmol/mol |
| resolution | 1μmol/mol |
| applicable gas | combustible gas |
| alarm point | Can be set manually, default low alarm value 500μmol/mol, high alarm value 2000μmol/mol |
| Response time | <30s |
| Alarm mode | LCD display real-time data and system status, Light Emitting Diode, sound, vibration indication alarm, fault and underVoltage |
| Operating temperature | -10~40℃ |
| Power Supply | DC3.7 (lithium battery) |
| Explosion-proof sign | Exib ⅡB T3 Gb |
| Charging time | 6h~8h |
| Operating Time | Not less than 8h continuous |
| Sensors Life | 24 months |
| Protection level | IP65 |
| Weight | Approx. 300g (without Portable Accessories) |
| Dimension | 210*66*30mm |
| Environmental humidity | < 95% RH No condensation |
Bosean K-100(EX-FR) Portable gas leak Detector Packing list
Host X1, Encasement Box X1, Charger X1, Calibration Cover X1, Manual X1, Certificate X1, Warranty Card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.