FANGRUI instrument DC-0506 Thermostatic Bath volume 6L Temperature range -5~ 100 ℃

Introduction

DC series low-temperature thermostatic bath (low-temperature thermostatic bath) adopts new high-performance monolithic microcomputer control, self-tuning PID adjustment, imported temperature sensor temperature measurement, high temperature control accuracy and small fluctuation; adopts good refrigeration compressor (some models are all imported brand compressors or compressor units), high refrigeration efficiency, fast cooling and low noise; adopts good fully sealed stirring motor, lubricating grease is not easy to volatilize, low noise and long life. The DC series adopts a large-screen backlit LCD screen, and the parameters are clear and clear, beautiful and stylish, and the HDC/HDCP series adopts two sets of light-emitting digital tube displays, and the set temperature and actual temperature are displayed separately. The thermostatic bath has accurate temperature control, complete functions, stability and reliability, and is convenient and safe to operate.

Features

1. Adopt high-performance single-chip microcomputer control, PID adjustment and self-tuning control technology, with high temperature control accuracy and short stability time;

2. It has the function of disconnection protection to prevent the instrument from getting out of control;

3. There is a liquid level protection device, which can effectively prevent various failures caused by the empty burning of the heating tube;

4. The upper limit over-temperature alarm function can be set by yourself, and if the range is exceeded, it will alarm immediately;

5. The instrument works stably and reliably, and the operation is very convenient;

6. The inner tank, table top and all parts immersed in liquid are high-quality stainless steel, which is corrosion-resistant and easy to clean;

7. DC series is an ordinary low-temperature constant temperature bath, with a temperature control accuracy of 0.1°C, a fluctuation of 0.05°C, a temperature range of -80°C~100°C, and a capacity of 6 liters, 15 liters, 20 liters, and 30 liters. Using large-screen backlight LCD, the parameters are clear and clear, beautiful and beautiful;

8. HDC series is a high-precision low-temperature constant temperature bath, with a temperature control accuracy of 0.01°C, a fluctuation of 0.01°C, a temperature range of -19.99°C~99.99°C, and a capacity of 6 liters, 15 liters, 20 liters, and 30 liters;

9. PHDC series is a high-performance and high-precision low-temperature constant temperature bath, with a temperature control accuracy of 0.01°C, a fluctuation of 0.01°C, a temperature range of -80°C~100°C, and a capacity of 6 liters, 15 liters, 20 liters, and 30 liters. It adopts professional AI PID adjustment method, with temperature/time programmability function (up to 180 program segments), and has the function of communicating with external computer and reversing control;

10. The low-temperature thermostatic bath is divided into ordinary desktop type (DC/HDC/PHDC series, 6 liters, 15 liters and temperature higher than -40 °C), floor type (DC/HDC/PHDC series with a temperature lower than -40 °C, volume 20 liters, 30 liters), small vertical (DCL/HDCL series) and horizontal (DCW/HDCW series)

All series of cryogenic baths can be tested directly in the tank, or they can be used to direct the controlled thermostatic liquid in the tank to other equipment through a hose connected to other equipment.

Application

It is widely used in bioengineering, food, chemical industry, metallurgy, chemical analysis, petroleum and other fields, providing users with a high-precision, controlled, and uniform temperature constant field source, and is a satisfactory constant temperature device for research institutes, colleges and universities, factory laboratories, and quality inspection departments.

host x1, cover x1, silicone tube x1, power cord x1, manual, certificate of conformity, warranty card x1.

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.