Introduction:
The RT600 is the most accurate and fast surface Spectrophotometer with optional On ColorTM software to measure a range of sample color values. The instrument is available with a variety of measurement standards to analyze the data. The ergonomic design of the instrument is made of non-slip materials, and the use of a movable small probe can be turned over for inconvenient measurement of large or irregular samples, and the unique sample cell design can preview the measurement sample area, while the built-in standard calibration white color is convenient for accurate measurement.
• Unique sample cell for preview of the sample measurement area
• Movable cell for easy measurement of larger samples
• Adopt inflatable tungsten lamp, long service life
• High accuracy and good repeatability
• Built-in standard calibration white
Technical Parameters:
| RT600 Surface Colorimeter | |
| Technical parameters | |
| Measure the angle | 0°/45° |
| Spectral response | 400-700 nm |
| bandwidth | Standard 20 nm, output 20 nm |
| Reflection range | 0-200% reflection coefficient |
| Reproducibility | Max△E=0.1 (standard white) |
| Measurement area | 8mm diameter |
| Data interface | Bidirectional RS232 interface (dedicated to RT chroma software) |
| baud rate | 300-57600 Bps |
| Response time | About 4 seconds |
| light source | Gas tungsten lamp, about 500,000 measurements |
| power supply | 115/230VAC，50-60Hz |
| Operating environment | 10℃ to 40℃；RH85% |
| Save the environment | -20℃ to 50℃ |
| Dimensional weight | 229×146×127mm；4Kg |
| Standard configuration | |
| RT600 | Surface Chromaticity Colorimeter, Calibration Standard Board, Power Adapter, Chinese and English Manual, Portable Case |
Product Features
【CIE XYZ,CIE Yxy,CIE L*a*b,CIEL*c*h】【Hunter LAB】【CMC】【CIE94】【Whiteness】【Yellowness】【Color Change Index】【DIN 6172】
RT600 Surface chroma ColorimeterSpecifications
| LIST | VALUE |
|---|---|
| Light spectrum Bandwidth | 20nm |
| Wavelength range | 400~700nm |
| Luminosity Repeatability | Max Delta E = 0.1 (base white) |
| Interface | Bidirectional RS232 interface (for RT chroma software) |
| analysis software | On Color TM software (optional) |
| Light source | Gas tungsten lamp |
| Light source lifetime | Approximately 500,000 measurements |
| Measurement time | About 4 seconds |
| Power Supply | 115/230VAC，50-60Hz |
| Dimensions | 229*146*127mm |
| Weight | 4kg |
| Measurement angle | 0°/45° |
| Reflection range | 0-200% reflection coefficient |
| Measurement area | 8Mm diameter |
| Baud rate | 300-57600 Bps |
| Operating temperature | 10~40℃ |
| Storage temperature | -20℃ to 50℃ |
| Operating humidity | RH85% |
RT600 Surface chroma Colorimeter Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Briefly describe the definition of chromatic aberration and whiteness in Colorimeter
- Why choose a Colorimeter for coating color detection and need the same light source?
- Geometry of color measuring instruments
- Determination of the color of transparent liquids with a Roviben Colorimeter
- What are the testing standards for paper Colorimeters?