YUZHOU YMP-1A Two-speed Metallographic polish-grinding machine

Introduction

The YMP-1A double-speed metallographic sample grinding and polishing machine is a grinding and polishing equipment controlled by a single-chip microcomputer. The body is made of ABS material and has a novel and beautiful appearance, anti-corrosion and durability; the solid large support chassis design ensures precise Rotary balance; two-speed selection of the grinding disc, easy to use; low motor noise, smooth rotation of the grinding disc; leak-proof design of the spindle, ensuring almost no damage to the bearings; equipped with cooling water pipes, the rotation direction can be adjusted for wet grinding; equipped with bottom flushing of the grinding disc Function to prevent accumulation and precipitation of grinding materials; when using, only need to replace sandpaper and polishing cloth to complete various processes such as rough grinding, fine grinding and polishing of various samples. It is a satisfactory metallographic sample preparation equipment for the laboratory.

Host X1, grinding and throwing disc (230mm) X2, ferrule X2, sandpaper (230mm) X4, adhesive-backed polishing cloth (230mm) X1, water inlet pipe X1, water outlet pipe (0019 32mm) X1, water inlet filtrate network X1, manual X1, certificate X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.