YUZHOU YMP-1 Metallographic polish-grinding machine

Introduction

The YMP-1 metallographic sample grinding and polishing machine is a grinding and polishing equipment controlled by a single-chip microcomputer. The body is made of ABS material and has a novel and beautiful appearance, anti-corrosion and durability. The solid large support chassis design ensures precise rotation balance. degree; the grinding disc has stepless speed adjustment or four-speed speed adjustment, and the direction of rotation can be switched; the motor is a DC brushless motor with long service life and low noise. The powerful motor torque brings powerful power and has an effective grinding and polishing experience; the spindle Leak-proof design ensures almost no damage to the bearings; Equipped with a cooling water pipe, the rotation direction can be adjusted for wet grinding; Equipped with a rinsing function at the bottom of the grinding disc to prevent the accumulation and precipitation of grinding materials; During use, you only need to replace the sandpaper and polishing cloth. It can complete various processes such as rough grinding, fine grinding and polishing of various samples. It is a satisfactory metallographic sample preparation equipment for the laboratory.

Host X1, grinding and throwing disc (230mm) X2, ferrule X2, sandpaper (230mm) X4, adhesive-backed polishing cloth (230mm) X1, water inlet pipe X1, water outlet pipe (0019 32mm) X1, water inlet filtrate network X1, manual X1, certificate X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.