YUZHOU YMP-2 Metallographic polish-grinding machine (stepless)

Introduction

The YMP-2 metallographic sample grinding and polishing machine is a grinding and polishing equipment using a single-chip microcomputer. The two discs are independently controlled. The body is made of ABS material and has a novel and beautiful appearance, anti-corrosion and durability. The strong large support chassis design ensures Precise rotation balance; stepless speed adjustment or four-speed speed adjustment of the grinding disc, the rotation direction can be switched; the motor is a DC brushless motor with long service life and low noise. The powerful motor torque brings powerful power and has effective grinding Polishing experience; the spindle's leak-proof design ensures almost no damage to the bearings; equipped with a cooling water pipe, the rotation direction can be adjusted for wet grinding; equipped with a washing function at the bottom of the grinding disc to prevent accumulation and precipitation of grinding materials; only need to replace the sandpaper and polish during use It can complete various processes such as rough grinding, fine grinding and polishing of various samples using a cloth. It is a satisfactory metallographic sample preparation equipment in the laboratory.

Host X1, grinding and throwing disc (230mm) X2, ferrule X2, sandpaper (230mm) X6, adhesive-backed polishing cloth (230mm) X2, water inlet pipe X1, water outlet pipe (0019 32mm) X1, water inlet filtrate network X1, manual X1, certificate X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.