RONGHUA JJ-1 laboratory Overhead Stirrer 160W

In order to meet the needs of new scientific research projects in modern laboratories, the electric stirrer developed and produced by our factory adopts a permanent magnet DC motor and a professional power-increasing and stable-speed circuit. It has stable speed, large torque, low noise, and no Carbon brushes need to be replaced.

JJ-1 series model

Instructions

First, fasten the stirring rod on the motor shaft fixture, and adjust the speed control knob to the lowest speed position, place the solution to be stirred at the center of the stirring rod, turn on the power switch, and select the required time or Normally open.

Precautions

1. Be sure to ground the wire when using it.

2. If you find that the stirring rod is not concentric and the stirring is unstable during work, please turn off the power and adjust the clamp to make the stirring rod concentric.

3. Medium-speed stirring can reduce vibration and prolong service life.

4. The instrument should be kept dry.

host X1, certificate X1, manual X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.