JingTian SNB-3 Digital Rotational Viscometer

Shanghai JINGTIAN SNB-3 Solder Paste Viscosity Tester, digital Rotational Viscometer 80 million cp

Shanghai JINGTIAN SNB-3 digital display Rotational Viscometer Viscosity range is 160~80,000,000mPa·s, it is a liquid crystal digital Viscometer suitable for solder paste Viscosity test, SNB-3 digital display Rotational Viscometer measurement accuracy is ± 1% (FS) newtonian fluid.

Brand

SKU: NB020594

JingTian

Model

SNB-3

Get Quote

JingTian shopSE

Information

Datasheet Catalog Manual

What else did others buy

Genuinegoods

JingTian SNB-3 Digital Rotational ViscometerOverview
Specifications
Comments
FAQs

SNB-3

Digital Rotational Viscometer

Introduction

The LCD of Shanghai JINGTIAN SNB-3 digital display rotary viscometer can display viscosity, speed, temperature, percentile torque, rotor number and the maximum viscosity value that can be measured at the current speed of the selected rotor, etc. It is a digital display rotary viscometer with a measuring range of 160 to 80,000,000 mPa·s .

JingTian SNB-3 Digital Rotational ViscometerSpecifications

LIST	VALUE
Display	digital display
Measuring range	160~80000000mPa·s
Rotor Specifications	L1#、L2#、L3#、L4#
Reproducibility	±0.5%F.S
Measurement Accuracy	±1%
Power	Dedicated power adapter (input 100~240V 50~60Hz)
Rotor speed	0.1~99.9rpm
Display information	Viscosity, rotational speed, percentile torque, rotor number and the maximum measurable Viscosity value of the selected rotor at the current rotational speed, etc
Speed control method	CVT

JingTian SNB-3 Digital Rotational Viscometer Packing list

Main unit X1, protection frame X1, rotor X1 (sleeve), base and horizontal adjustment bolt X1, lifting frame and lifting mechanism X1, special power adapter X1, wrench X1, RTD temperature probe X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

viscosity Viscosity Pa. S 170 + 30 PaS Malcom PCU-205:10RPM 3Min, is there a replacement for this test?

[A]

Use SNB-3, L4 to turn, 25RPM, timing measurement for 5-7 minutes, the measurement result can be almost measured

[Q]

Solder Paste Viscometer Simple viscosity test

[A]

Recommended SNB-3 Solder Viscometer

[Q]

The Viscometer of solder paste, pcu-205 is now in use. I don't know if your one can be replaced and if the principle is the same.

[A]

Generally use SNB-3, L4 to turn, 25RPM, timing measurement for 5-7 minutes, the effect is similar to that of Ma Kang

[Q]

Excuse me, does this solder paste Viscometer need to be connected to a computer to print with this printer?

[A]

Equipped with our printer, you can print directly on the Viscometer. If it is a third-party printer, it will be driven by a computer.

[Q]

SNB-1 My solder paste is 200,000 How much is the minimum?

[A]

Solder paste is a non-newtonian fluid. SNB-1 belongs to a low viscosity Viscometer. It also uses L4 to rotate. At 25RPM, the maximum can only measure 24,000, so SNB-1 cannot be used.