TQC Sheen SH0530 coating surface scratch resistance instrument

TQC Sheen SH0530 coating surface scratch resistance instrument is a mechanical Scratching Tester for evaluating coating Hardness, SH0530 scratch resistance instrument can test Coating thickness up to 0.3mm, panel size is 100x150x1.6mm.

Brand

SKU: NB020785

TQC sheen

Model

SH0530

Price

$ 9168.00

Promotion

Service

The delivery and service By NBchao.Com

Get Quote

TQC sheen shopSE

Information

Datasheet RFQ Contract Video Catalog Manual

What else did others buy

Genuinegoods

TQC sheen SH0530 Coating surface scratch resistance instrumentOverview
Specifications
Comments
FAQs

SH0530

Coating surface scratch resistance instrument

Introduction

The mechanized scratch Tester is used for coating hardness evaluation based on the scratch resistance method.

Clamp the test plate tightly and move it slowly while scraping the surface with a stylus or alternative tool. Depending on the test procedure, specified or variable loads can be applied to obtain varying degrees of failure, from traces to destruction. The voltmeter indicates the contact between the tool and the metal sample substrate. Maximum panel size: 100x150x1.6mm (0.3mm coating).

The TQC Sheen SH0530 Scratch Resistance Tester for Coated Surfaces meets the weight settings required by the ISO 1518-1 standard. Weight groups specified in the previous international standard ISO 1518 can be selected.

Product display

TQC Sheen SH0530 Scratch Resistance Tester for Coated Surface

TQC sheen SH0530 Coating surface scratch resistance instrumentSpecifications

LIST	VALUE
Scribe traverse speed	35mm/s
Maximum size of test sample	1001501.6mm
Maximum thickness of test sample	0.3mm
meet the standard	ISO 1518-1
Load (loading) range	20N
Power supply Voltage	230VAC 50HZ

TQC sheen SH0530 Coating surface scratch resistance instrument Packing list

Host X1, tungsten carbide hemispherical stylus X1, weight (including spindle) X1, manual X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.

FAQ

[Q]

SH705 I want this one.

[A]

SH705 is the current SH0530. The 705 is the old model before SHEEN. After it was acquired by TQC, it was called SH0530, and the machine has not changed.

[Q]

May I ask your data, is it based on that pointer beating? To record the data, or to see if the film on the surface is broken.

[A]

This is the metal bottom, and once its membrane is scratched, the current of the Scratch meter passes through the current pointer, which means that the pointer is scratched, the coating is scratched, and the ammeter in the middle of the machine will swing. The test is to gradually apply weight. Generally, the test is about 10 cycles, and the average value of sexual repeability is also taken.

[Q]

Can we normally use 220V voltage?

[A]

The information says 230V, and it can work normally at the domestic voltage of 220V, don't worry.

[Q]

Can all coating surface scratch resistance instruments be used for inspection in GB/T15102 standard?

[A]

Not necessarily, but this SH0530 coating surface scratch resistance instrument can be considered.

+TQC sheen SH0530 Coating surface scratch resistance instrument Big data

+TQC sheen SH0530 Coating surface scratch resistance instrumentStandard

+Navigation

TQC Sheen SH0530 coating surface scratch resistance instrument

TQC sheen SH0530 Coating surface scratch resistance instrumentOverview

Introduction

Product display

TQC sheen SH0530 Coating surface scratch resistance instrumentSpecifications

TQC sheen SH0530 Coating surface scratch resistance instrument Packing list

FAQ