HANNA HI981402 pH Determination Controller
HANNA pH measurement controller HI981402 is suitable for hydroponics, aquaculture, greenhouses, water quality continuous monitoring, the measurement acidity range is 0.0~14.0 pH, HI981402 pH measurement controller Measurement accuracy is +/- 0.2 pH.
HANNA
HI981402
-
LEICI 962241 Conical pH composite electrode for solid and semi-solid piercing measurements
$ 242.00 -
HANNA HI12922 Bluetooth Fillable Conical Glass acidity electrode
$ 509.00 -
YUEPING PHS-3CB acidity meter Measurement range: (-2.00~ 19.99) pH intrinsic error +/- 0.01pH
$ 200.00 -
Kodida CT-6658 PH/ORP Controller, Electrodeless Range: 0.00~14.00pH
$ 218.00 -
FANGZHOU FZ-650 2-in-1 planar electrode for solid and semi-solid soft, wet surfaces
$ 133.00
Introduction
Acidity pH: 0.0 to 14.0 pH, Temperature: 0.0 to 60.0 °C, 32.0 to 140.0 °F
LED red alarm light. When the measured acidity value exceeds the set value ±0.5 pH, the alarm light flashes; it enables 24-hour continuous monitoring of acidity pH-temperature samples. It is simple in design and easy to use.
The measurement readings are clear, the visual effect is very good, and the manual [4.0pH, 7.0pH] calibration is the best choice for continuous monitoring of hydroponics, breeding, greenhouses, and water quality.
It is also suitable for hanging use in the laboratory, effectively utilizing laboratory space, and enabling rapid and continuous measurement of multiple batches of samples and retrieval of corresponding measurement data.
HANNA HI981402 pH measurement controllerSpecifications
| LIST | VALUE |
|---|---|
| PH range | 0.0~14.0pH |
| PH Measurement Accuracy | ±0.2 pH |
| Resolution | 0.1 pH |
| Impedance | 10^12Ohm |
| Power Supply | 230VAC/12VDC power adapter |
| Dimensions | 86 x 110 x 43 mm |
| Weight | 150g |
| Standard electrode reagent | HI1286 custom special plastic acidity composite electrode, BNC interface, 2 meters wire length |
| Environmental temperature | 0~50℃ |
| Calibration method | Manual [4.0pH, 7.0pH] calibrated |
| alarm setting | LED red warning light, when the measurement reading acidity value exceeds the set value +/- 0.5 pH, the alarm light flashes |
| Allowable Relative Humidity | RHmax 95% non-condensing |
HANNA HI981402 pH measurement controller Packing list
machine X1, manual X1, certificate X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.