TQC Sheen SH1693 Cone-plate Viscometer (CP1)

Introduction

The Cone Plate Viscometer (CP1) is the standard test for dynamic viscosity measurement. It is faster and more accurate by using a new high-precision microprocessor control. Since non-Newtonian fluids exhibit different viscosities relative to the applied shear rate, the cone plate viscometer strictly controls them to 10,000S-1 (B.S./ISO requirements) or 12,000S-1 (ASTM). These are often thought of as representing paint applications through rollers or brushes, and therefore reflect "real world" applications.

Temperature control

Since most viscosity measurements are temperature sensitive, the sample is placed on a temperature control plate that can be set between 5°C and 65°C.

There is no cone kit for the conical and base units. The cone kit is ordered separately.

Features

• Interchangeable cones for easy installation with quick-release chucks for easy cleaning

• Available in four units: P, cP, Pa.s or mPa.s

• Pre-selected or adjustable run time 5-59 seconds, manual or auto-start

• Fast temperature control, warm-up time adjustable 0-59 seconds

• Adjustable limit/tolerance settings with warnings

• User calibration: viscosity (for any cone of certified oils) and temperature

• Memory for 100 readings, 3-digit adjustable sample identification, RS232 PC/printer data output

• Simple menu-guided/soft-key operation: cone range, parameter setting, readings, set point and plate temperature, speed, viscosity, sample identification, calibration, date

• Selectable modes: full-featured or simplified routines, security protection.

Meets standards

ASTM D4287, ISO 2884, BS 3900-A7.

Product display

Viscometer X1, power cord X1, operating handle X1, protective front cover X10, user manual X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.