Qiwei XK97-A Colony Counter

Introduction

XK97-A colony counter is a digital semi-automatic bacteria Detector. It consists of counters, probes and counter pools. The counter is designed and manufactured by CMOS integrated circuit. In the dark dark background counting tank, the colonies are relatively clear with energy-saving circular fluorescent lamp side lighting. According to the bacteria counting test procedure, the instrument display is designed with three digits. When the number of colonies growing in the Petri dish exceeds 300, the test sample should be diluted and re-made to ensure the accuracy of the count. The instrument can reduce the labor intensity of experimenters, improve work efficiency and work quality. Products are widely used in the detection of bacterial counts in food, beverages, pharmaceuticals, biological products, sanitary products, drinking water, industrial wastewater, and clinical specimens. It is a necessary tool for health and epidemic prevention stations, environmental monitoring stations, food hygiene supervision and inspection stations, hospitals, biological product laboratories, drug testing stations, food factories, daily chemical factories, universities, and scientific research institutes.

application method

Turn on the power and turn on the lights of the counting pool. Throughout 001 inches; insert the probe plug into the instrument socket and press down. Reset and cycle through; set key to zero to make the instrument work.

Place in a Petri dish for testing.

C. Count the colonies one by one on the bottom of the Petri dish with a probe pen. Every point should be heard. Eucommia; Yingang's explanation is effective, otherwise it should be focused. At this point, the colony at that point is colored and the number is automatically incremented.

Check carefully with the magnifying glass to make sure nothing is missing and the count is complete.

The number on the display screen is the number of colonies in the Petri dish.

Record the number and remove the Petri dish. According to and other; reset and traverse; Key, the screen enters the initial state.

Precautions

The instrument should be used on a flat, firm surface.

Do not tilt the probe too much while counting colonies. Enter the number when the probe is pressed lightly until it pops.

The instrument should be protected from moisture, shock, direct sunlight, acid and alkali corrosion, and a dust cover should be added after use.

Take care to prevent bacterial culture from contaminating the counting tank.

Neither the instrument nor the probe can be disassembled at will. If a fault is found, it should be repaired by an experienced technician.

complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.