LINSHANG LS117 optical density meter upgraded version
Light hole 2mm; accuracy up to +/- 1 %/ +/- 2%; can be tested by Measurement Institute; suitable for X-ray film, aluminized film, milky white, mist and other diffuse transmission material testing; can display light transmitance value and light density value.
LinShang
LS117
-
DONGRU DR80 light transmitance Tester
$ 568.00 -
IWAVE WT13 Tri-channel Transmittance meter Visible/UV/IR light
$ 257.00 -
LINSHANG LS108A lens transmittance Measurement Instrument, infrared inks hole Tester, three-in-one optical path
$ 360.00 -
LINSHANG LS108 blue-violet light Tester Optical inspection transmittance Tester, three-in-one optical path design
$ 360.00 -
LINSHANG LS161H Solar Film Tester, Infrared UV Barrier Rate, Visible Light Transmission Rate Test
$ 164.00
Introduction
The light source of the LS117 densitometer adopts the principle of diffuse transmission measurement. It is an advanced translucent material light transmittance meter with the effect of an integrating sphere. The light source conforms to the CIE photopic function standard, which can ensure that it passes the inspection of the Institute of Metrology. The instrument is suitable for the light transmittance and optical density test of milky white diffusion plate, zirconia, aluminized film, X-ray film, foggy, frosted glass and other materials.
Relevant optical knowledge science: Optical density is optical density, abbreviated as OD, which means the light-shielding ability of materials. It is commonly referred to as absorbance, and the national standard is called optical density. It refers to the logarithm of the ratio of incident light to transmitted light or the logarithm of the reciprocal of light transmittance. The calculation formula is: OD=lg (incident light/transmitted light) or OD=lg (1/light transmittance).
Features of LS117 light transmittance test instrument
1. High precision and wide measurement range, the optical density value can be measured to 6 OD.
2. The light transmittance and optical density can be tested at the same time, and directly displayed on the screen.
3. The light source of the optical density meter adopts the principle of diffuse transmission, which meets the test requirements of milky white and foggy materials. And the light source conforms to the CIE photopic function standard, ensuring that it passes the national measurement.
4. The optical density meter is equipped with a fixed base and a bracket. There are two measurement methods: either the fixed base can be used for testing, or the probe can be taken down to test larger-sized materials.
LinShang LS117 Optical density meterSpecifications
| LIST | VALUE |
|---|---|
| Light transmitance measurement Accuracy | ±1%（0% --- 50%）±2%（50% --- 100%） |
| Light transmitance resolution | 0.0005%（0% --- 10%）0.005%（10% --- 100%） |
| Density Measurement range | 0.000 OD --- 6.000 OD |
| Density measurement Accuracy | ±0.02（0 --- 2.00 OD）±2%（2.00 --- 6.00 OD） |
| Optical Density Resolution | 0.001 OD（0 --- 2.00 OD）0.01 OD（2.00 --- 4.00 OD）0.1 OD（4.00 --- 6.00 OD） |
| Optical hole size | 2mm |
| Peak wavelength of visible light | 380~760nm |
| Weight | Technologies 576g (without battery) |
| Power | 4 * AAA alkalinity dry battery |
| display | 240 * 160 dot matrix LCD |
| Host size | 148*76*26mm |
LinShang LS117 Optical density meter Packing list
host x1, certificate of conformity x1, manual x1, warranty x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.