Germany IKA T10 Small Disperser Basic 1L/30000rpm
Germany IKA T10 Disperser Processing capacity of 0.5~ 100ml small Disperser, digital display Rotation speed. The IKA T10 has a wide Speed range (8000-30000rpm), works at high linear speed, and has a variety of dispersion tools to choose from.
IKA-
Qiwei FJ200-S Digital Display High Speed Homogenizer 200W
$ 285.00 -
Qiwei GFJ-0.5 (GFJ-550) laboratory small Disperser (high-speed frequency conversion) with 5L Mixing Tank
$ 574.00 -
Qiwei 2.5 liter single layer, barrel
$ 91.00 -
CHINA FS-750 Lab High Speed Disperser Inverter Brushless Motor 750W
$ 377.00 -
HUXI HR-550JFS Laboratory High Speed ground Disperser frequency conversion, square tube 550W/5L
$ 553.00
The T series dispersers are used to mix and disperse a variety of samples of different viscositiesProduct. This range of dispersers makes any application possibleVery good effect, and improve product quality and stability.

T10 basic ULTRA-TURRAXDisperser
Small dispersers with a throughput of 0.5 – 100 ml. The wide speed range (8000 – 30,000 rpm) ensures that users can work at high linear speeds, even with small diameter rotors. With a wide range of dispersion tools to choose from, they can be used in a wide variety of applications.
Features
The quick-plug interface facilitates the interchange of dispersed tools
The body is lightweight, the design is humane, and it is suitable for manual operation
It can be plugged into the power supply (no power adapter required) for easy use
The stainless steel dispersion knives are easy and quick to clean, and no tools are required to disassemble them
Available in two sizes of disposable dispersed knives, ideal for PCR analysis
The high-performance motor guarantees very good speed stability
Runs silently
IKA T10 basic set DisperserSpecifications
| LIST | VALUE |
|---|---|
| Motor Input Power | 125W |
| Motor output power | 75W |
| Processing Capacity | 0.0005~0.1L |
| Max. Processing Viscosity | 5000mPa.s |
| Speed regulation range | 8000~30000rpm |
| Display mode | scale |
| Speed regulation mode | stepless speed regulation |
| Noise level | 65dB(A) |
| Extension arm diameter | 8mm |
| Extend arm length | 100mm |
| Process type | batch processing |
| Dimension | 56*178*66mm |
| Weight | 0.61kg |
| Environmental temperature | 5~40℃ |
| Allowable Relative Humidity | 80% |
| Protection level | IP30 |
| Power supply Voltage | 230 /115/100V |
| Frequency | 50/60 Hz |
IKA T10 basic set Disperser Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Modern environment full range of product selection table [selection]
- What is the difference between emulsion and dispersion?
- Preparation and performance of high Gloss UV curing waterborne white topcoat
- Production Process of Energy-saving Heat reflection Insulation Coatings for Colored Buildings
- Preparation method of water-based patented environmental protection industrial paint
- What is the composition of the abrasive paste suitable for the high-speed disperser?
- Practical examples of water-bomecoating varnishing performance and tinctorial strength
- Coating additives addition method and addition process
- Coating production equipment introduction
- How Coating Disperser works


T10 basic set





