Germany IKA UTTD power control laboratory Disperser 8000rpm
Germany IKA UTTD power control Disperser can provide good mixing, dispersing, grinding and homogenizing effects. Speed range of UTTD power control is 400~8000 rpm, with dispersion, mixing, homogenizing and grinding functions in one.
IKA-
Pushen WJ-1.1A Stirring multipurpose machine, electric lift
$ 1183.00 -
HUXI HR-400JFS Laboratory High Speed grinding Disperser Square Tube 400W/3L
$ 541.00 -
CHINA FS-350 Digital High Speed Disperser Barrel Holder 350W
$ 211.00 -
Qiwei GFJ-0.7 (GFJ-750) Coating Disperser high-speed frequency conversion, with 5L Mixing Tank
$ 734.00 -
MODERNER SFJ-400D ground Stirring machine, electric lift
Login
Introduction
The IKA UTTD control tube disperser has been upgraded to a more powerful motor, which has been upgraded to be named IKA UTTD power control Test tube disperser. It provides excellent mixing, dispersing, grinding and homogenizing results, while providing special safety protection to meet the needs of the transfer Preparation requirements for stained, toxic, and volatile samples.
Dispersion tubes
Hermetically sealed, single-use dispersion tubing optimized for your application. It can save a lot of money for cleaning
clean the cost while avoiding cross-contamination.
Programmable test conditions
Time, power, capacity: Targeted, systematic management of your test conditions
Frequently used laboratory programs can be saved on the host computer for you to recall at any time.
Adjustable forward and reverse function
With a clear multi-line display menu, the time and frequency of forward and reverse switching can be easily set.
Turbo acceleration function
Mix, homogenize or grind well in a short time: with a simple press of the button, the turbo accelerator button is all it takes
Appear. Instantaneous speeds up to 8,000 rpm.

IKA UTTD power control DisperserSpecifications
| LIST | VALUE |
|---|---|
| Motor Input Power | 36W |
| Motor output power | 28W |
| Max. Processing Viscosity | 5000mPa.s |
| Speed regulation range | 400 ~ 8000 rpm |
| Display mode | OLED |
| Speed regulation mode | 10 RPM Steps |
| Noise level | 50dB (A) when no-load |
| Process type | batch processing |
| Dimension | 122*54*178mm |
| Weight | 1.3 kg |
| Environmental temperature | 5~40℃ |
| Allowable Relative Humidity | 80% |
| Protection level | IP20 |
| Power supply Voltage | 100 - 240 V |
| Frequency | 50/60 Hz |
| DC Voltage | 24 V |
| current consumption | 1500 mA |
| Rotation speed deviation | 3% |
| Reversible direction of rotation | Yes |
| Timer display | OLED |
IKA UTTD power control Disperser Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Optical inspection of ultraviolet curing coatings for PET film - Lv Jianbo
- What is the difference between emulsion and dispersion?
- Current Situation and Development of Basket Grinder
- The normal use of the high-speed disperser should be done in place!
- Determination of Pigment Dispersion with Dry Sieve Vibrator
- Structural Principle and Application of Disk Thermal Disperser
- Design Structure and Operation of High Speed Disperser
- Application of RK Scraper in Spreader paper whiteness performance test
- How to evaluate the dispersing capacity of a high-speed disperser?
- How High Speed Stirrer Works


UTTD power control





