Germany IKA UTTD power control Workstation Disperser 8000rpm
The German IKA UTTD power control Workstation Disperser adopts program control and has various functions of stirring, dispersing and grinding. The Speed range of UTTD power control Workstation is 400~8000rpm and the viscosity is up to 5000 mPas.
IKA-
PUSHEN PS2817 Blue Devil Blue-devil Coating Rapid Dispersion Tester, Vertical Clamp Tank
$ 1392.00 -
SFJ-400 ground dispersed Stir three-purpose machine YONGLIDA motor power 400W
$ 646.00 -
Qiwei JFS-550S Inverter Disperser Electric Lifting 550w
$ 542.00 -
High Speed Disperser Qiwei FS-400D Digital Display High Speed Disperser
$ 321.00 -
High Speed Disperser Qiwei FS-400D digital display High Speed Disperser electric lift model with 5-liter double-layer drum
$ 486.00
Introduction
The IKA UTTD control tube disperser has been upgraded to a more powerful motor, which has been upgraded to be named IKA UTTD power control Test tube disperser. It provides excellent mixing, dispersing, grinding and homogenizing results, while providing special safety protection to meet the needs of the transfer Preparation requirements for stained, toxic, and volatile samples.
Dispersion tubes
Hermetically sealed, single-use dispersion tubing optimized for your application. It can save a lot of money for cleaning
clean the cost while avoiding cross-contamination.
Programmable test conditions
Time, power, capacity: Targeted, systematic management of your test conditions
Frequently used laboratory programs can be saved on the host computer for you to recall at any time.
Adjustable forward and reverse function
With a clear multi-line display menu, the time and frequency of forward and reverse switching can be easily set.
Turbo acceleration function
Mix, homogenize or grind well in a short time: with a simple press of the button, the turbo accelerator button is all it takes
Appear. Instantaneous speeds up to 8,000 rpm.

IKA UTTD power control Workstation DisperserSpecifications
| LIST | VALUE |
|---|---|
| Motor Input Power | 36W |
| Motor output power | 28W |
| Max. Processing Viscosity | 5000mPa.s |
| Speed regulation range | 400 ~ 8000 rpm |
| Display mode | OLED |
| Speed regulation mode | 10 RPM Steps |
| Noise level | 50dB (A) when no-load |
| Process type | batch processing |
| Dimension | 122*54*178mm |
| Weight | 1.5 kg |
| Environmental temperature | 5~40℃ |
| Allowable Relative Humidity | 80% |
| Protection level | IP20 |
| Power supply Voltage | 100 - 240 V |
| Frequency | 50/60 Hz |
| DC Voltage | 24 V |
| current consumption | 1500 mA |
| Rotation speed deviation | 3% |
| Reversible direction of rotation | Yes |
| Timer display | OLED |
IKA UTTD power control Workstation Disperser Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Modern environment full range of product selection table [selection]
- What is the difference between emulsion and dispersion?
- Preparation of Energy-saving Exterior Wall Thermal Insulation Coatings
- Preparation and Application of Liquid Marble Coatings
- The normal use of the high-speed disperser should be done in place!
- Preparation method of water-based patented environmental protection industrial paint
- Spreader method of roller coater
- Problems and Solutions in the Operation of Thermal Disperser
- Operation and Impeller Analysis of High Speed Dispersers
- Preparation and performance of high Gloss UV curing waterborne white topcoat


UTTD power control Workstation





