Japan OSP W-16 wire cleaning brush, wire length 16mm 156 acupoints

Introduction

The Japanese OSP wire cleaning brush W-16 has a wire bristle length of 16mm, a bristle part of 25mm wide and a length of 100mm, with 8 rows and 156 acupuncture points.W-16Wire cleaning brushes are suitable for cleaning wire rods in laboratories or anilox rolls in production machines.W-16The base of the wire brush is wooden and has a thickness of 10mm.

Main applications:

The anilox roller wire brush is used to clean the anilox roller, which is suitable for the cleaning of anilox rollers of production machines, the cleaning of laboratory coating wire rods, etc. The cleaning effect of using a wire brush with anilox roller is effective and does not damage the instrument

Features

1. At present, the stainless steel brush (anilox roller wire brush) sold on the market, the Wire diameter of the copper brush is 0.07mm, and the Wire diameter of the anilox roller wire brush is only 0. 06mm！ Because it is fine, it can be cleaned more effectively.

2. Because the diameter of the steel wire is only 0.06mm, the bristles are super soft and will not damage the roll surface while cleaning.

3. This wire brush is made in Japan. Each one is handmade by artisans with years of experience.

How to use:

   1) After the machine is stopped, wash off the ink on the surface of the wire rod applicator with clean water.

   2) Spread the cleaning solution directly on the surface of the anilox roller, wait for about ten minutes, and then use the anilox roller wire brush to brush the wire rod coater in a circular motion for 3 to 5 minutes, during which the cleaning solution will produce some foam, and let the foam stay on the surface of the anilox roller for 3 to 5 minutes after brushing.

   3) Finally, rinse off the cleaning solution with clean water. Pay attention to clean it and do not leave the cleaning solution on the surface of the anilox roller.

   4) If the wire rod applicator is seriously blocked: the residence time and brushing time of the cleaning solution can be appropriately extended, or the above steps can be repeated.

Wire brush X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.