MODERNER U-1500 U-Trough Applicator film thickness 1500μm
MODERNER U-1500U Trough Type Applicator is made of stainless steel, the film thickness is 1500 microns, and the hardness of U-1500U is 9Cr18Mo, which conforms to GB/T 1727 standard.
Moderner-
CHINA SZQ 25x25 Cube Applicator film 37/50/75/100μm
$ 126.00 -
JINGKELIAN QTG-A 4-sided frame Coating Applicator Frame Film Applicator 300/400/500/600μm
$ 159.00 -
HUINUO , Frame 100/200/300/400μm Frame Film Applicator Spreader Width 160mm
$ 275.00 -
HuiNuo SZQ-150 200/400/600/800 4-sided Applicator
$ 259.00 -
MODERNER Frame type 50/100/150/200 Large frame type 4-sided Applicator film width 80mm
Login
Introduction
MODERNER U-shaped trough preparer U-1500 is a stainless steel U-shaped Wet Film Applicator with a coating film thickness of 1500μm. The U-shaped trough preparer has 1 groove, the groove width is 110mm, and the size is 127x110mm. .
hardness
HRC48±2
Applications
It is used to coat a wet film of specified thickness to measure the covering power and color of the sample or to prepare samples, etc.
plan

Instructions
Place the template on the platform and secure it so that it does not move when the preparer slides over it. According to the required wet film thickness, select the Applicator, place it on the short side of the sample, close to parallel or at a specified position, then pour about 5 ml of sample in front of the Applicator, press both ends of the Applicator with your fingers, and press at 150 Sliding at a constant speed of mm/second, that is, coating into a wet film of required thickness. After use, wash and dry with solvent, and apply oil or Vaseline on the surface.
Moderner U-1500 U-shaped Slot ApplicatorSpecifications
| LIST | VALUE |
|---|---|
| type | single-sided |
| WFT | 1500μm |
| Application width | 110mm |
| material | stainless steel |
| size | 127*110mm |
| type | single-sided |
Moderner U-1500 U-shaped Slot Applicator Packing list
Applicator X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.


U-1500





