PUSHEN NDJ-1 Rotational Viscometer 10~100000mPa · s
Display mode Pointer type, Measurement range 10~100000mpa.s, Rotor specifications 1 #, 2 #, 3 #, 4 #, Rotor speed 6/12/30/60rpm, Measurement accuracy +/- 5% F.S.
Pushen-
FANGRUI SNB-1 Digital Rotational Viscometer 1~ 2,000,000mPa·s
$ 501.00 -
HuiNuo NDJ-5S + 0 #Digital Rotational Viscometer experimental Viscosity-Meter 10~100,000 CP
$ 410.00 -
RVDV-1 digital Rotational Viscometer Viscosity Detector with L0 rotor
$ 1367.00 -
TQC DV2200 viscosity calibrated oil S6 500ml
$ 430.00 -
HUINUO SNB-1 Digital Display Rotational Viscometer Viscosity Testing Instrument with Ultra Low Viscosity Adapter
$ 988.00
Applications
The NDJ-1 rotary viscometer is a new type of instrument used to measure the viscous resistance of liquids and the absolute viscosity of liquids. It is widely used to determine the viscosity of various fluids such as grease, paint, food, and adhesives.
Structural principle
1. Use the gear system and clutch to change the speed, which is operated by a special rotary knob, divided into four speeds, and selected according to the measurement needs.
2. According to the different specifications of the instrument, five kinds of rotors from 0 to 4 are attached, which can be selected according to the viscosity of the measured liquid with the speed.
3. The instrument is equipped with a pointer to fix the control mechanism for accurate reading. When the speed is fast (30 rpm, 60 rpm) and it is not possible to read while rotating, then the pointer control lever can be pressed to fix the pointer for easy reading.
4. The protective frame is to stabilize the measurement and protect the rotor. The use of a protective frame for measurement can achieve more stable measurement results. The yellow protective ring is to protect the instrument shaft connecting rod from external force and affect the stability of the instrument accuracy.
5. The instrument can be used by hand, equipped with a fixed bracket and a lifting mechanism, and should be used fixed when measuring small quantities and constant temperature in the laboratory.

Pushen NDJ-1 Swirl/spinning ViscoMeterSpecifications
| LIST | VALUE |
|---|---|
| Display mode | Pointer |
| Measurement range | 10~100000mpa.s |
| Rotor specification | 1#、2#、3#、4# |
| Rotor speed | 6/12/30/60rpm |
| Measurement Accuracy | ±5%F.S |
| Power supply Voltage | 220V±10% 50Hz±0.5Hz |
| Application standard | GB2794、ISO 2884-2、ISO 2555、ASTM D2196 |
| Operating temperature | 5~35℃ |
| Dimension | 300*300*450mm |
| Weight | 1.5Kg (excluding bracket) |
| Allowable Relative Humidity | ≤80% |
Pushen NDJ-1 Swirl/spinning ViscoMeter Packing list
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- Swirl/spin Viscosity meter for determination of coating viscosity
- Detection of Phenyl-acrylic Waterborne Varnish Emulsion and Film-forming Properties
- Yue Ping NDJ-1 Rotary Viscometer Instruction Manual
- Fangrui NDJ-1C-T and SNB-1J-T digital viscometer installation introduction
- Fangrui SNB-1A/NDJ-1C viscometer rotor installation specific steps
- Shanghai Hengping NDJ-1 Rotational Viscometer instruction manual
- Jingke NDJ-1 swirl/spin Viscometer Operating Instructions
- Jingke NDJ-8S Digital Viscometer Operation Instructions
- Method for Determination of Coating Viscosity by SWIRL/spin Viscometer
- Combined pencil Hardness Tester operating instructions
- ActiveNF EN ISO 1157-1999
- Active 1219-2010
- ActiveGB/T 14797.2-2008
- ActiveGB/T 12004.4-2003
- ActiveGB/T 15357-2014
- ActiveJB/T 9357-1999


NDJ-1






