AISRY LX-5612 Taber Wear Tester

Introduction

This machine is suitable for wear resistance test of leather, cloth, paint, paper, floor tile, plywood, glass, natural rubber, etc. The method is to cut the test piece with a standard cutter, use a specified type of grinding wheel, and load a certain weight to wear it. After reaching the specified number of revolutions, take out the test piece, and observe the condition of the test piece after grinding or the difference between the weight of the test piece before the test and the weight after the test. Abrasion index calculation formula: Abrasion loss weight/test revolutions×1000 Optional grinding wheel number: H18 

Host X1, load weight 250gX1 pair, load weight 750gX1 pair, sample clamp ring X1 set, power cord X1, abrasion wheel X1 pair, new sandpaper X1 piece, hexagon wrench X1 set, toolbox X1, manual X1, vacuum cleaner X1 set

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.