LICHEN CS-20B High Purity Water Machine, Ultra Pure Water Purifier
Lichen CS-20B high-purity water machine is a laboratory ultra-pure water machine, also known as a water purifier, with a water production of 20L/h, the quality of pure water is better than that of laboratory secondary water, and the water inlet pressure of CS-20B high-purity water machine is ≥ 0.1 Mpa.
LICHEN
CS-20B
-
GUOHUA SYZ-B quartz sub-boiling high-purity water distillation unit, water output: 800~1000ml/h
$ 548.00 -
MOLECULAR MP-40L reverse osmosis (RO) water purifier, water production rate 40L/h
$ 3304.00 -
LEICI UPW-N15UV Ultrapure Water System 15 L/h
$ 2337.00 -
TIANMA UPTM-C100 Vertical Ultrapure Water Mechanism Water Quantity 100L/H
$ 5005.00 -
BIO0021 Puro80 Laboratory Water Purification System, three-stage water 80L/H water storage tank 60L
$ 8974.00
Product Description
CS series high-purity water generator adopts RO membrane reverse osmosis and anion exchange technology, selects imported materials, and prepares high-purity water based on the principle of selective permeability of ions, which can effectively remove organic matter, inorganic anions, cations, colloids, bacteria and other impurities in the water, and the effluent water quality meets the national laboratory water standard (GB6682-92), and finally achieves reagent-grade high-purity water without interference background.
Features
◇ Imported ion filtration membrane and high-pressure, silent pure water pump are adopted, the operation quality is more reliable, and the water quality is more extensive
◇ With system flushing function: before turning on the water every time, the system will automatically rinse for 18 seconds before the system starts to produce water
◇ With system protection function: when the water pressure is too low or there is no water, the equipment will automatically shut down, and the equipment will automatically start when the water source comes from the source
◇ High output, low energy consumption, low power consumption, water output of 20L/h, power consumption is only 50W, which is 1/300 of similar products
◇ Using professional water treatment technology, the ratio of high-purity water is about 40%, and the water consumption is low
◇ No need for electric heating pipe heating, no fouling, no need to clean
◇ No heat loss, the effluent does not need to be cooled at room temperature, and can be directly used in experiments
◇ Simple operation, easy maintenance, low operating cost
◇ Two-stage RO pre-desalination system (high salt content water quality selection)
◇ It has the function of upgrading water quality and water quantity
Series selection
| Model | CS-10B | CS-20B |
| Enter the power supply | 220V/50HZ | |
| power | 25W | 50W |
| Pure water is produced | 10L/H (varies with source water temperature 10°C~30°C) | 20L/H (varies with source water temperature 10°C~30°C) |
| Water temperature requirements | 5～40℃ | |
| Apply water pressure | ≥0.1 Mpa(1kg) | |
| Effluent standards | Better than laboratory secondary water (≤0.6us/cm) | |
| Dimensions | 540mm×350mm×860mm (L×W×H) | |
| weight | 40Kg | |
LICHEN CS-20B High purity water machineSpecifications
| LIST | VALUE |
|---|---|
| Flow Rate | 20L/h |
| Pure water quality | Better than laboratory secondary water (≤ 0.6us/cm) |
| inlet pressure | ≥ 0.1 Mpa (1kg) |
| Operating Environment | Water temperature requirement 5~ 40 ℃ |
| Power | 220V/50HZ |
| Host size | 540×350×860mm |
| Packing Weight | 40Kg |
| power | 50W |
LICHEN CS-20B High purity water machine Packing list
complete-built unit X1, manual X1, certificate of conformity X1, warranty card X1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.