OSP-84 L470φ 10mm production wire-wound drawdown Bar 84μm wet-film

D-Bar Advantages:

Customers who use traditional wire scrapers often encounter a wide variety of problems.

(1) The steel wire is loose and broken

(2) It is not easy to clean and easy to block

(3) The surface shape cannot be changed freely

Is there a product that can replace the wire scraper?After several improvements, the D-BAR was finally developed.It was officially launched into the market in 2001.

The D-Bar can control wet film thicknesses as low as 1.5 μm, enabling ultra-thin coating

Comparison of the amount of coating on the reel rod and the D-Bar

Difference in coating weight: The bottom of the groove of the D-Bar is wider than that of a conventional wire scraper, so in general, the coating weight of the D-Bar is larger.

D-Bar line rod specifications

The length of the D-Bar specification can be customized, please contact us for detailsNorth and South Tide customer service

How to use:

When applying liquid to the surface of the substrate, adjust (scrape) the amount of liquid with D-Bar.

Application

The D-Bar series of coating rods for extrusion production produced by OSP in Japan are widely used in the following industries:

Membrane:Liquid crystal film, X-ray film, packaging film, etc

Glass:Automotive glass, liquid crystal glass, architectural glass, etc

Paper:Newspapers, light paper, wallpapers, special papers, etc

Packing Material:Cartons, tapes, wrapping paper, etc

Tape:videotapes, etc

Magnetic card:Tickets, recharge cards, etc

Metering rod X1

[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.