JINGQI DHS-16 Moisture Analyzer 50g/5mg
Weighing readability 5mg, weighing value 50g, moisture readability 0.02%~ 0.1%, heating temperature 50~180 ℃.
JingQi-
MA101 Moisture Analyzer halogen Fast Moisture Analyzer 110g/1mg
$ 938.00 -
XY-100MS (Plus) Smart Moisture meter Wireless + Battery
$ 1936.00 -
Halogen Fast Moisture Tester JHY-150F Touch Screen Moisture Analyzer 150g/0.01%
$ 644.00 -
XIONGFA XF-1102MB Tea halogen Moisture Analyzer 110g/180 ℃
$ 377.00 -
XINYUN XY-200MS intelligent halogen lamp Moisture Analyzer Moisture readability 0.01%
$ 2061.00

The Specifications are valid in the following environments;
Ambient temperature: 15°C-30°C, it is guaranteed to be operable in the environment of 5°C to 40°C, and the measurement accuracy of the rapid moisture analyzer is guaranteed under extreme temperatures.
Relative Humidity: 50%-75%, no condensation at 30°C.
Warm-up time: Wait for at least 30 minutes after the moisture analyzer is connected to the power supply. When it comes back from standby, the moisture analyzer can be used immediately.
power supply:
Input AC Voltage 220V, 3A, 50Hz±1Hz
Voltage fluctuation: 220±10%
Power load: the maximum power is 350W during heating
Protection: Protected from dust and moisture, Pollution Degree: 2nd Degree
DHS Moisture Analyzer Series Parameters
| model | DHS-20A | DHS-16A | DHS-16 |
| readability | 1mg | 5mg | 10mg |
| Maximum weighing value | 110g | 50g | |
| Moisture Greenhouse Accuracy | ±0.5% (sample ≥ 3g) | ||
| Moisture content determination readability | 0.02%~0.1% (sample ≥ 3g) | ||
| Temperature control adjustment tolerance | ±0.1℃ | ||
| Heating temperature range setting | 50°C to 180°C | ||
| Heating time range setting | 0min-99min (adjust by 1min) | ||
| End point control | Timing automatic | ||
| Sample Drying Parameters | 9 types (see the post print for details) | ||
| Moisture content measurement range | 0%-100% | ||
| communication | Serial RS232 | ||
| Pan size | 100mm | ||
| Dimensions (L*W*H) | 330*180*140mm | ||
| net weight | 2.9kg | ||
| gross weight | 4.2kg | ||
| heating source | Halogen lamp | ||
JingQi DHS-16 Moisture AnalyzerSpecifications
| LIST | VALUE |
|---|---|
| Weighing readability | 5mg |
| Maximum weighing value | 50g |
| Moisture temperature Accuracy | +/- 0.5% (sample ≥ 3g) |
| Water readability | 0.02%~ 0.1% (sample ≥ 3g) |
| Temperature adjustment Accuracy | ±0.1℃ |
| Heating temperature range | 50~180℃ |
| Timer | 0~99min |
| How to end the measurement | Timing automatic |
| Sample drying parameters | 9 kinds (see print after details) |
| Moisture range | 0~100% |
| Communication interface | Serial port RS232 |
| Pan size | F100mm |
| Dimensions | 330*180*140mm |
| Net Weight | 2.9kg |
| Total Weight | 4.2kg |
| heating source | Halogen lamp |
JingQi DHS-16 Moisture Analyzer Packing list
host x1, transformer x1, instruction manual x1, certificate x1, warranty card x1
[Note] Because the manufacturer's packaging may be updated or upgraded, the detailed packaging list shall be subject to the latest standard configuration of the manufacturer.
FAQ
- ActiveJJG 658-2022
- ActiveJJF 1367-2022
- ActiveGB/T 20264-2006
- ActiveGB/T 27506-2011
- ActiveGB/T 29249-2012
- ActiveASTM D4017-2022
- ActiveGB/T 13025.3-2012


DHS-16






